Battery Installation
NOTE:
A flashing “E” appearing on the LCD display indicates a weak battery and that replacement of batteries
is required.
•Turn radio off.
•Prepare replacement batteries to ensure a quick and easy change. Failure to change batteries within
1minute will reset presets and clock settings.
•The battery cover is located on the back of the unit. Apply a gentle downward pressure and slide the door to the right side of the unit.
•Place 2 ‘AA’ batteries inside the unit oriented to the illustration located just below the battery compartment.
Tuning the Radio
Seek Tuning
•Turn radio on using the On/Off button located on the top of the radio.
•Select desired band by pressing the “Band” selector on the front of the unit.
•Press and hold the proper tuning button (Up/Down) for approximately ½ second. Radio will seek for next active signal station.
•Repeat as many times as desired.
9