TECHNICAL SPECIFICATIONS
DIMENSIONS | Height | 85 | cm | ||
| Width | 59.5 | cm | ||
| Depth | 60 | cm | ||
POWER SUPPLY VOLTAGE AND FREQUENCY |
| ||||
TOTAL POWER ABSORBED | 90 W |
|
| ||
AVERAGE DAILY UNITS ELECTRICITY(*) | 0,77 kWh |
| |||
GROSS CAPACITY | 100 l | (3,54 cuft) |
| ||
NET CAPACITY |
| 80 l | (2,82 cuft) |
| |
STAR RATING |
|
|
|
|
|
|
|
|
|
|
(*)This figure is based on standard test results in accordance with the European Standard EN153. Actual con- sumption will depend on how the appliance is used and where it is located.
INSTALLATION
Positioning
For this appliance to work efficiently, it must not be located where the temperatures will fall below 10°C (50°F) or rise above 32°C (90°F), e.g. conservatories.
For correct operation this appliance must be located in a dry atmosphere, away from heat sources, e.g. cookers, radiators, boilers and direct sunlight.
You should also ensure that air can circulate freely around the back and the top of the cabinet. There should be 100mm (4”) between the top of the cabinet and any overhanging kitchen furniture. Alternatively allow 50mm (2”) between the top of the cabinet and any overhanging kitchen furniture and a gap of 25mm (1”) on either side of the appliance.
A
mm10 NP006
B mm10
Do not obstruct the space underneath. The back of the cabinet may be placed close to the wall but must not touch it. DO NOT install in places with restricted ventilation.
Adjust the level of the appliance by screwing out the adjustable foot, or feet, at the bottom of the cabinet using your fingers.
13
D200 |