Door reversal directions

1.Disconnect from the electricity supply.

2.Remove all loose items, including food, store food in a cool place.

3.dismantle the lower hinge (3), pin (1) and the screw (2);

4.Slide out the door from pin (D), unscrew the pin and reposition on the opposite side.

5.unscrew the left front foot and reposition on the opposite side;

6.unscrew the two screws which mask the holes for fixing the hinge from the left front side;

7.reassemble the door;

8.reassemble the lower hinge (turning it 180¡), the pin and the screw on the opposite side, as shown in the figure;

9.dismantle the handle (6) and reassemble it on the opposite side.

Important

After completion of the door reversiing operation, check that the door gasket adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier on a low setting.

	2
°
180	2

D299

D590

D336