Zanussi ZBF6124A user manual Environmental concerns, Push the part Hc on the part Ha

Page 12

Ha

Hc

8 mm

8 mm

Ha

K

 

Ha

Hb

Hb

 

Push the part (Hc) on the part (Ha).

Open the appliance door and the kitchen furniture door at an angle of 90°.

Insert the small square (Hb) into guide (Ha).

Put together the appliance door and the furniture door and mark the holes.

Remove the brackets and mark a distance of 8 mm from the outer edge of the door where the nail must be fitted (K).

Place the small square on the guide again and fix it with the screws supplied. Align the kitchen furniture door and the appliance door by adjusting the part Hb.

Hb

Hd

Press the part (Hd) on the part (Hb).

Do a final check to make sure that:

All screws are tightened.

The magnetic sealing strip is attached tightly to the cabinet.

Important! If the ambient temperature is low (for example, in the Winter), the size of the gasket decreases. The size of the gasket increases when the ambient temperature increases.

Environmental concerns

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential

negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.

12

Image 12
Contents Freezer ZBF6124A Contents Safety informationCare and cleaning InstallationService Daily UseControl panel First useDaily use Helpful Hints and TipsCare and cleaning Periodic cleaningHints for storage of frozen food Defrosting the freezerWhat to do if… Periods of non-operationTechnical data Closing the doorInstallation PositioningElectrical Connection Installing the appliance Door reversibilityDo the following steps Install the appliance in the niche Adjust the appliance in the nicheHb, Hc and Hd Holes FurnitureEnvironmental concerns Push the part Hc on the part HaPage Page Page 212719591-UK-00-21012010