Zanussi Z1921/8 FFA manual D724 PR266

Page 17

Fit the appliance in the niche by making sure that it stands against the interior surface of the unit on the side where the door hinges of the appliances are fitted. Insert the appliance until the upper strip butts up against the unit (1) and make sure that the lower hinge is in line with the surface of the unit (2).

Fasten the appliance with 4 screws provided in the kit included with the appliance.

(I = short) (P = long)

Apply the sealing strip pushing it between the refrigerator and the adjacent cabinet.

Apply covers (C-D) on joint cover lugs and into hinge holes.

Snap vent grille (B) and hinge cover (E) into position.

Separate parts Ha, Hb, Hc, Hd as shown in the figure.

2

D023

I

P

D724

 

 

D

C

 

 

E

 

 

 

B

 

Ha

Hb

 

Hc

 

 

 

Hd

PR266

 

 

17

Image 17
Contents Refrigerator Freezer Installation Important Safety InformationContents Operation Freezing fresh food Fast-freezingFrozen food storage ThawingUse of the refrigerator Setting the temperatureFresh food refrigeration Normal Operating SoundsPositioning the door shelves Movable shelvesEvent of a Power Failure Energy Saving AdviceHints and Tips Food StorageMaintenance and Cleaning Something not Working Symptom Solution7 0 5 9 2 9 9 2 Service and Spare PartsCustomer Care Department Standard guarantee conditions Guarantee ConditionsEuropean Guarantee ExclusionsStar Rating Technical SpecificationsShelf holders InstallationPositioning Green and Yellow Earth Blue- Neutral Brown- Live Electrical connectionsInstructions for totally built-in appliances Door reversal Recess dimensionsD724 PR266 21 m PR167/1 Electrolux plc