Installation Instructions | Whirlpool 4152821 specification

INSTALLATION

INSTRUCTIONS

BEFORE YOU BEGIN, READ THE FOLLOWING INSTRUCTIONS COMPLETELY AND

CAREFULLY. THEY WILL SIMPLIFY THE INSTALLATION.

1. After

removing the shipping carton,

be sure to remove all

6. Lay two carton

corner posts or other

protective material

protective packaging

materials such

as tape and shipping

(such as a throw

rug) on the floor; then

lay the unit on either

pads.

Waxy residue

from protective

shipping

material

of its

sides

the corner posts. The corner posts will

may

be removed

from compactor with

a mild

solution of

protect

the

finish of the

compactor

and the floor. See

liquid

household

cleaner and water.

Figure

7. NOTE:

Do not

truck or handle by console.

2.Your compactor is designed for recessed installation. A six (6) inch (15cm) clearance from the right edge of the drawer front is desirable for added convenience in bag removal. Also allow twenty-three (23) inches (58.4 cm) in front of the appliance for drawer removalSee Figure 2.

COMPACTOR I

WALL OR

OTHER

OBJECTS

FIGURE 7

Remove the cardboard shipping pad located on the bottom. See Figure 7. Stand compactor upright.

7.A grounded receptacle should be located 18” (45.7 cm) (min.) from the floor and in the center of the opening. See Figure 8.

(5fJYcmj ’	’ 6”
	(15cml
FIGURE2	’

3.The compactor’s overall dimensions are: Height 33-7/8” (86cm) (min.), Depth 24” (slcm), Width 15” (38.lcm). Select a cabinet opening to fit. See Figure 3.

T-

33-l/8” (Mcm)

I
-1. 5	f

4.Remove drawer as shown:

a.Grip handle and raise front of drawer until it clears stops. See Figure 4.

b.Grasp side ridges of the drawer and lift drawer out. See Figure 5.

7l?-lT

18” (45.7 cm) MIN.

IF-V

FIGURE8

8.Before moving the compactor into position, measure the cabinet opening as shown in Figure 9. To determine if height adjustment is required, see steps 9 and 10 below.

-CABINET OPENING

FIGURE9

9.The rear wheels of your compactor are preset for a minimum cabinet opening of 34” (86.4 cm) (position A). To adjust for higher openings, tilt the compactor to one side and support with a corner post or a screwdriver handle.

CAUTION: Use care so that the compactor does not drop on your hand.

10.To adjust the height, remove screw from position “A”in Figure 70. Move the rear wheel and screw to position “B or C”:

33-718” to 34-3/l 6” (86 cm to 86.8cm) use position “B”: 34-3/16” to 34-l/2” (86.8cm to 87.6cm) use position “C”.

FIGURE4FIGURE5

5.Remove any materials that are shipped in the drawer. Some models have a literature storage compartment located inside the front panel. See Figure 6. DO NOT REMOVE THE BAG.

3Yt:

FIGURE 10

Repeat for other rear wheel.

4152821

4152821 specifications

The Whirlpool 4152821 is a remarkable appliance that combines efficiency, convenience, and advanced technology to enhance the user experience in the kitchen. This component is primarily known for its role in the company's range of refrigerator models, contributing to better food preservation and energy efficiency.

One of the main features of the Whirlpool 4152821 is its innovative cooling technology. This appliance is designed to maintain optimal temperatures, ensuring your food stays fresh for longer periods. Featuring a Multi Air Flow system, the refrigerator evenly distributes cold air throughout the compartments, preventing hot spots and providing consistent cooling. This technology helps to preserve the quality of fruits, vegetables, and perishable items while reducing spoilage.

Energy efficiency is another significant characteristic of the Whirlpool 4152821. Designed with energy-saving features, it meets stringent Energy Star guidelines, which means it consumes less electricity compared to standard models without sacrificing performance. This not only helps in reducing utility bills but also makes it a more environmentally friendly choice for consumers who are conscious about their carbon footprint.

The Whirlpool 4152821 is also known for its user-friendly design. The appliance often comes with adjustable shelves and door bins, enabling users to customize the interior layout to fit various item sizes. This adaptability is especially useful for families or individuals who frequently store large quantities of groceries. Additionally, many models incorporating this part feature clear drawers that make it easy to see and access items, ensuring that users can quickly find what they need.

Durability is a hallmark of the Whirlpool brand, and the 4152821 reflects this commitment to quality. Made from high-quality materials, this appliance is built to withstand the rigors of daily use while maintaining its functionality. The reliability of the Whirlpool 4152821 means fewer repair needs, adding to the overall value of the investment.

In summary, the Whirlpool 4152821 is a standout component in the realm of modern refrigerators. Its advanced cooling technology, energy efficiency, adaptable design, and durability make it an excellent choice for households looking to elevate their food storage solutions. Whether you're a culinary enthusiast or someone with a busy lifestyle, this appliance is designed to meet and exceed everyday kitchen demands.