Door Reversal

If required the opening direction of the door can be changed as follows:

To reverse the bottom hinge assembly proceed as follows:

Disconnect the appliance from the electricity supply.

Tilt the appliance backwards, resting the top edge of the appliance on a stool or something similar.

Unscrew the adjustable feet situated on both sides at the front (2 pieces). Remove the lower door hinge plate by unscrewing the 3 retaining screws.

Remove the hinge pin from the bottom of the door.

Slot the hinge pin into the hole in the hinge plate and relocate the hinge assembly to the opposite location and refit using the retaining screws.

Refit the feet into their opposite location. Put the cabinet in the upright position.

To reverse the top hinge assembly proceed as follows:

Remove the 2 worktop retaining screws from the back of the appliance.

Slide the worktop towards the rear and lift clear of the appliance.

Remove the 2 upper hinge plate retaining screws.

Remove the hinge plate from the top of the door.

Unscrew the hinge pin from the hinge plate and re- insert on the opposite side of the plate.

Rotate the hinge assembly 180° and insert the hinge assembly into the opposite location.

Refit the 2 hinge plate retaining screws.

Relocate the worktop and refit the worktop retaining screws.