Automatic Control

You can only use the automatic control for the main oven. When you use the automatic controls for the first time it's probably best to choose a time when you are at home. That way you can check to make sure you've set everything correctly and you'll feel much more confident when you are away from home in the future.

SETTING THE CONTROLS FOR AUTOMATIC USE

This is very easy. All you have to do is work through the steps below. The clock will work out the rest for itself.

1 Is the electricity supply on?

2	Is the clock	To adjust turn the selector knob
	showing the	to 'Manual' then turn to 'Time
	correct time? Setting'. Turn the setting knob in
		either direction.

3	How long will	Turn the selector knob to 'Cook
	the food take	Time'. Then turn the setting
	to cook?	knob until the length of time you
		want the food to cook shows in
		the display.		The	maximum
		cooking time is 10 hours. 'Auto'
		will show in the display.

4	What time do	Turn the selector knob to 'End
	you want the	Time'. Turn the setting knob until
	food to be	the time the oven is to switch off
	cooked by?	shows in the display. The
		cookpot (	) will go out.
		The 'End Time' must not be
		more than 23 hours 59 minutes
		from the time of day. For
		example	if the	time	of day is

9.00am the latest 'End Time' will be 8.59 am the next day.

5	Set to	Turn	the selector knob to
	automatic.	'Automatic'.

6	Turn on the	Turn	the oven control to the
	oven control.	required setting.

The time shown on the right gives an example of setting the automatic controls when the time is 9.00 am, the food is to be cooked for 2½ hours and the food is needed at 6.00 pm (1800 hours).

The clock will work out what time the oven will switch itself on and it will turn the oven off at the end. Once the automatic sequence is finished there will be an alarm to remind you that you need to set the oven for manual operation. To do this turn the selector knob to 'Manual'. Turn off the oven control. If you change your mind and want to cancel a programme that you have set simply turn to 'Time Setting' and then to 'Manual'.