Installation instructions, Levelling

Installation instructions

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Fitting under a counter

(kitchen worktop or sink)

By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.

570	-
	600
820
600
IN05

Proceed as follows:

Remove the machine’s worktop by unscrewing the two rear retaining screws, pull the worktop from the back of the machine and slide out the front slots, lifting the worktop.

Insert the machine after adjusting height and levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed. During all operations that involve accessibility to internal components the dishwasher has to be unplugged.

Be sure that once the appliance has been installed, it is easily accessible for the service engineer in the event that a repair is required.

If the dishwasher is later used as a free-standing appliance, the original worktop must be re-mounted.

The plinth on free-standing appliances is not adjustable.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

Water supply connections

This dishwasher must be plumbed into a cold water supply.

For making the connection itself, the coupling nut fitted to the machine’s supply hose is designed to screw onto a 3/4" inch gas thread spout.

The water pressure must be within the limits given in the "Technical specifications". Your local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected.

The inlet hose must hang down vertically from the supply tap.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. (Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible).

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

Do not use, for connection, old hoses which have been used with another appliance.

The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.

BDW 55 specifications

The Tricity Bendix BDW 55 is a versatile and efficient built-in dishwasher designed to meet the demands of modern kitchens. With its sleek design and advanced features, it integrates seamlessly into any home while providing exceptional cleaning performance.

One of the standout characteristics of the BDW 55 is its impressive capacity. With the ability to accommodate up to 13 place settings, this dishwasher is perfect for families or those who frequently entertain guests. The adjustable shelves and foldable plate supports allow users to customize the interior layout to fit larger pots and pans, maximizing space efficiency for all types of dishwashing needs.

The BDW 55 is equipped with multiple wash programs, offering tailored solutions for various types of dishes and levels of soiling. From intensive cycles that tackle heavily soiled cookware to quick wash options for lightly soiled items, users can select the most suitable program for their specific requirements. Additionally, a special eco-setting promotes environmentally friendly washing by optimizing water and energy usage.

In terms of technologies, the Tricity Bendix BDW 55 includes an efficient A+ energy rating, minimizing electricity consumption without compromising performance. Moreover, the dishwasher features a highly effective spray arm system that ensures thorough cleaning in every corner of the dishwasher, allowing for consistent results every time.

Noise levels are also an important consideration in appliance design, and the BDW 55 operates at a quiet 49 dB, making it an excellent choice for open-plan living spaces or homes where noise reduction is a priority. Users can run the dishwasher during the night without disturbing their household routine.

The intuitive control panel is user-friendly, featuring a digital display that provides clear information about the selected program and estimated time remaining. A delay start option allows users to set the machine to begin washing at a later time, further enhancing convenience.

Finally, the Tricity Bendix BDW 55 places a strong emphasis on safety, incorporating a child lock feature to prevent unintended operation. With its combination of efficient features, versatile wash programs, and user-friendly design, the Tricity Bendix BDW 55 stands out as an excellent choice for those seeking a reliable and effective built-in dishwasher for their kitchen.