Instructions for totally built-in appliances Door reversal
The appliance is supplied with the right door opening. To change the opening direction of the door proceed as in the following instructions before installing it.
1.Unscrew the upper pin and remove the spacer
2.Remove the upper door
3.Unscrew the pins (B) and the spacers (C) and refit them on the middle hinge of the opposite side. Snap the hinge cover (A).
4.Refit the upper door, the upper pin and the spacer on the opposite side
5.Unscrew the lower pin and remove the spacer and refit them on the opposite side
Recess dimensions
Height | 1780 mm |
Depth | 550 mm |
Width | 560 mm |
To ensure adequate ventilation, allow the clearances shown in figure.
A |
C |
B |
50 mm | min. |
200 cm2 | |
| min. |
| 200 cm2 |
D567 |
|
18