Tricity Bendix FD 845 installation instructions Installation, Positioning, Shelf holders

Page 15

INSTALLATION

Warning

IF YOU ARE DISCARDING AN OLD APPLIANCE THAT HAS A LOCK OR CATCH ON THE DOOR, YOU MUST ENSURE THAT IT IS MADE UNUSABLE TO PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE.

Positioning

This appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rating plate, which is located at the left on the inside of the appliance.

The following table shows which ambient temperature is correct for each climate classification:

SN +10°C to + 32°C

N+16°C to + 32°C

ST +18°C to + 38°C

T+18°C to + 43°C

It should be located in a dry atmosphere, out of direct sunlight and away from extreme temperature e.g. not next to a boiler or radiator, or in a very cold room e.g. an outhouse, where the temperatures may fall below 10°C (50°F). If these temperatures are exceeded i.e. colder or warmer, then the appliance may not operate correctly.

You should also ensure that air can circulate freely around the back and the top of the cabinet. There must also be at least 100 mm (4”) distance between the top of the cabinet and any overhanging kitchen furniture (A). Ideally, the appliance should not be positioned beneath overhanging furniture (B).

There should also be a gap of 25 mm either side of the appliance. Do not obstruct the space underneath. The back of the cabinet may be placed close to the wall but must not touch it. DO NOT install in places with restricted ventilation.

Adjust the level of the appliance by screwing out the adjustable foot, or feet, at the bottom of the cabinet using your fingers (see figure).

Shelf holders

Your appliance is equipped with shelf retainers that make it possible to secure the shelves during transportation.

To remove them proceed as follows:

Raise the shelf from the back, push it in the direction of the arrow until it is freed and remove the retainers.

Depending upon the position which you choose for your appliance, you may wish to reverse the way in which the door opens. To do this, refer to instructions on “Door reversal directions” paragraph.

Important

It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.

100 mm

 

A

B

10 mm

10 mm

NP005

 

D200

 

 

A

 

B

15

Image 15
Contents FRIDGE-FREEZER Installation Important Safety InformationContents Description of the Appliance Operation Thawing Making ice cubesFresh food refrigeration Movable shelves Positioning the door shelvesFreezing Calendar Normal Operating Sounds Energy Saving AdviceEvent of a Power Failure Hints and TipsMaintenance and Cleaning Freezer Something not Working Symptom SolutionService and Spare Parts Customer Care Department7 0 5 9 2 9 9 2 Exclusions Guarantee ConditionsStandard guarantee conditions European GuaranteeNET Capacity Technical SpecificationsInstallation PositioningShelf holders Green and Yellow Earth Blue- Neutral Brown- Live Electrical connectionsDoor reversal Rear spacersPage Page Consumer care telephone number……08705

FD 845 specifications

The Tricity Bendix FD 845 is a highly regarded refrigerator that combines advanced technology with practical design, making it an ideal choice for modern kitchens. This appliance stands out due to its energy efficiency, spacious interior, and user-friendly features, ensuring that it meets the needs of families and individuals alike.

One of the key features of the FD 845 is its impressive energy rating. With a focus on sustainability, Tricity Bendix has engineered this refrigerator to operate with minimal energy consumption, thus reducing environmental impact and lowering electricity bills. The energy-efficient compressor is designed to maintain optimal temperatures while using less power, making it an economically savvy option.

The FD 845 offers a generous storage capacity, allowing users to store a significant amount of groceries and perishable items. Its thoughtfully designed interior includes adjustable shelves, which provide flexibility to accommodate various food items. The inclusion of door bins and compartments helps to maximize storage efficiency, ensuring that everything is easily accessible and organized.

Additionally, the FD 845 features a built-in multi-air flow system that promotes uniform cooling throughout the refrigerator. This technology ensures that every corner of the appliance is kept at the perfect temperature, preserving the freshness of food for longer periods. The frost-free design eliminates the need for manual defrosting, freeing users from the tedious task of defrosting and allowing for seamless operation.

Another standout characteristic of the FD 845 is its noise-reduction technology. The appliance operates quietly, making it suitable for open-plan living spaces where noise can be a concern. Users appreciate the tranquility it brings to their kitchens, especially during meal preparations or gatherings.

In terms of user convenience, the Tricity Bendix FD 845 is equipped with intuitive controls, allowing for easy temperature adjustments. The LED lighting inside offers bright illumination, making it easy to find items even in low light situations.

Overall, the Tricity Bendix FD 845 is designed with modern consumers in mind. Its balance of efficiency, capacity, and advanced features makes it a reliable choice for anyone looking to enhance their kitchen with a high-quality refrigerator. Whether you are a culinary enthusiast or someone who values convenience, the FD 845 meets diverse needs while delivering exceptional performance.