Recommended Installations, Available Models

The Sound Advance® ST2432D SpeakerTile® is a remarkable combination of widebandwidth, wide dispersion, and a highly- refined aesthetic presentation, designed for commercial installations. It is part of a unique family of truly invisible distributed sound products from Sound Advance. All ST2432D SpeakerTile models are available in several mounting options, allowing them to be easily installed into standard T-bar suspended ceiling systems, completely replacing a standard 2' x 2' ceiling tile. The ST2432D is available in six different models, featuring a selection of standard 3-dimensional patterns or factory-applied surface finishes that allow a match with almost any suspended ceiling tile pattern. The white Expanded PolyStyrene (EPS) front surface of the speaker tile allows all models to optionally be finished on-site with any water-soluble finish, such as latex paint, or covered with light wallpaper, fabrics and selected texture coats,* further enhancing the SpeakerTile’s ability to blend invisibly with almost any interior design choice. Patented Planar Diaphragm Technology™ allows a ST2432D that has been properly installed in a suspended ceiling to radiate sound in a 140° hemispherical pattern with smooth, even coverage. This dispersion characteristic allows ST2432D speakers to be spaced farther apart than narrow-dispersion conventional speakers, reducing the total quantity of loudspeakers required in almost any installation.

The ST2432D is a two-way, full-range device that utilizes a crossover centered at 1,200Hz, with 12dB per octave slopes for both low-pass and high-pass sections. The ST2432D is transformer-coupled, with the following input taps: 0.5W, 1W, 2W, 4W, 8W, 16W, 32W and 8-ohm bypass. An optional PBB 2.0 backbox is available, and is recommended for use when the SpeakerTile is installed in air handling spaces. An optional ECS enclosure compensation module is available, to optimize performance when the ST2432D is used with the PBB 2.0.

*Please contact Sound Advance for advice before applying any textured coating, light wallpaper or fabrics to the ST2432D.

Recommended Installations:

•9/16" T-bar suspended ceiling systems

•15/16" T-bar suspended ceiling systems

Recommended Environment:

• Indoor or weather-protected outdoor

Recommended Accessories:

•PBB 2.0 Backbox kit (23-3/4" x 23-3/4" x 5"; 603mm x 603mm x 127mm)

•ECS2432D Enclosure compensation module

•Safety Strap (secures SpeakerTile to backbox)

Available Models:

ST2432D: Plain white (shown in photo)

ST2432D-3D1: Fine Fissured® (or similar) tile pattern

ST2432D-3D2: Cortega® (or similar) tile pattern

ST2432D-3D4: Fissured® (or similar) tile pattern

ST2432D-3D7: Optima®/Ultima® (or similar) tile pattern

ST2432D-3D21: Cirrus® (or similar) tile pattern

Tegular cuts are available to match tegular ceiling tiles on 15/16" T-bar grids. Tegular cuts are not required to match tegular ceiling tiles on 9/16" T-bar grids. (See below for ceiling tile examples.) Call Sound Advance for details.

Flush

Tegular

Flush

Tegular

T-Bar and

9/16" Grid

15/16" Grid

Ceiling Tile

Variations

Performance Specifications:

Radiating Surface: 549 in2 (3,540cm2) Planar Diaphragm

Tweeter System: 0.82 lb (0.37kg) Magnet with 1.02" (26mm) voice coil; 1,200Hz, 12dB/octave high-pass crossover Woofer System: 0.82 lb (0.37kg) Magnet with 1.02" (26mm) voice coil; 1,200Hz, 12dB/octave low-pass crossover

Frequency Response: 40Hz – 19kHz ±4dB

Power Rating: 75 Watts RMS as per EIA standard RS-426-A

Pressure Sensitivity: 92dB, 1W/1m

System Impedance: 8 ohms nominal, 5.5 ohms minimum

Transformer: Primary Voltage — 70.7 Volts

Primary Taps — 0.5, 1, 2, 4, 8, 16, 32 Watts; 8-ohm bypass Dimensions (H x W x D): 23-7/16" x 23-7/16" x 3" (595mm x 595mm x 76mm)

Product Weight: 11.0 lbs (5kg) each

Shipping Weight: 15.5 lbs (7kg) each

Installation Example:

Ceiling Tile (used as rear panel of backbox

PBB 2.0

Backbox

ST2432D

SpeakerTile

T-Bar

Ceiling

Grid

Warranty:

Sound Advance warrantees the ST2432D to be free of any defect in materials or workmanship for a period of 5 years from the date of purchase. During the warranty period, Sound Advance will repair or replace (at its option) all such defects without charge for parts or labor, if returned prepaid to the proper Sound Advance service facility, together with the original sales receipt or other proof of purchase. The unit will be returned prepaid.

©2007 Sound Advance. All Rights Reserved. Sound Advance, SpeakerTile and Planar Diaphragm Technology are trademarks or registered trademarks of Dana Innovations. Fine Fissured, Cortega, Fissured, Optima, Ultima and Cirrus are registered trademarks of Armstrong World Industries. Specifications subject to change without notice. For the latest Sound Advance product information please go to www.soundadvance.com.

SA SOUND ADVANCE R	212 Avenida Fabricante, San Clemente, CA 92672
	TEL 800-592-4644 / 949-492-7777 • FAX 949-361-5151 • www.soundadvance.com

ST2432D specifications

The Sonance ST2432D is a premium speaker designed to meet the high demands of both residential and commercial audio applications. Renowned for its exceptional sound quality and innovative technologies, the ST2432D reflects Sonance's commitment to delivering a superior auditory experience.

One of the standout features of the ST2432D is its dual 4-inch woofers and a 1-inch tweeter, which work in perfect harmony to produce a rich, balanced sound that can fill any room. This configuration allows for a wide frequency response, ensuring that both the low bass notes and the crisp highs are rendered with clarity and precision. The speaker’s design minimizes distortion, providing clean audio even at higher listening levels.

The ST2432D is built with advanced materials, including a durable polycarbonate grille that protects the speaker components while maintaining aesthetic appeal. Its sleek, modern design allows for seamless integration with a variety of interior designs, making it an excellent choice for both home theaters and commercial spaces. Additionally, the paintable grille offers customization options, allowing users to tailor the speaker's appearance to match their décor.

In terms of technology, the Sonance ST2432D employs proprietary Acoustic Isolation technology that enhances sound quality by minimizing cabinet resonance. This feature ensures that the sound produced is true to the original recording, delivering an immersive listening experience. Furthermore, the speaker includes high-quality crossover components, which manage the distribution of audio frequencies effectively, ensuring that each driver performs at its best.

The ST2432D is also designed with an emphasis on ease of installation. It features a low-profile mounting system that allows for straightforward placement in walls or ceilings, while its robust design ensures it is suitable for a variety of environments, including high-traffic areas. The speaker is compatible with various amplifiers and receivers, making it a versatile addition to any audio setup.

Overall, the Sonance ST2432D stands out in the competitive speaker market due to its exceptional sound quality, innovative technologies, and sleek design. Whether for a high-end home theater or a professional audio system, the ST2432D delivers a listening experience that is both engaging and immersive, appealing to audiophiles and casual listeners alike.