Toastmaster TA710, TA710S, 7224, 7236, 7324, 7336, 7348 manual Section II Installation and Testing

Page 5

GRIDDLES

SECTION II INSTALLATION AND TESTING

A. Unpacking

Models A710 and A710S are packed in foam-in-place material. All other griddles (both drop-in models and counter top models) are mounted on a wood pallet, or shipping platform.

1. Models A710 and A710S : remove staples from top of carton and discard.

2. Remove top portion of foam pack- ing and discard.

3. Lift unit out of carton.

Model A710S with 1 1/2” legs.

4.A710/A710S are shipped with legs already installed.

5.All other models are uncrated by cutting the banding straps that hold the carton in place with the shipping pallet.

6.Lift the carton up and off the griddle and shipping pallet.

7.Carefully turn the griddle upside down and remove the bolts that secure the pallet to the griddle.

8.Remove the shipping pallet and discard.

Remove the shipping pallet.

9.Your griddle is now ready for installation. Refer to paragraph B.

PAGE 4

Toastmaster ®

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Griddles Section I General Information Description of Models Griddles Unpacking Section II Installation and TestingModel A710S with 1 1/2 legs Remove the shipping palletInstallation and Electrical Connections Caster shown on griddle stand Thermostat control knob and signal light Testing the InstallationSection III Operation ControlsSeasoning the Griddle A710 controlsOperating Hints and Safety Cooking Guide For Toastmaster Griddles Food Control Time Advance Preparations Setting MinutesCleaning the Exterior Case of Fire Section IV Cleaning Cleaning the Griddle SurfaceCooking Capacities Griddle AccessoriesElectrical Data Model Models A710 A710S14 7/16 Knockouts Case Bottom TOP View Griddles Quantity Griddles T3001872 Warranty Index Griddles
Top Page Image Contents