Frigidaire FGHB2844LE, FGHB2844LP Ice maker/dispenser tips, Cleaning the ice maker, An extended

Page 23

AUTOMATIC ICE & WATER DISPENSER

IMPORTANT

On occasion, unusually small ice cubes may be noticed in the bucket or in dispensed ice. This could occur in normal operation of the ice maker. If you start seeing these more frequently, it may be an indication of low water pressure or the water filter needs to be replaced. As the water filter nears the end of its useful life and becomes clogged with particles, less water is delivered to the ice maker during each cycle. Remember, if it’s been six (6) months or longer since you last changed your water filter, replace the water filter with a new one. Poor quality household water may require the filter to be changed more frequently.

Ice maker/dispenser tips

•If your refrigerator is not connected to a water supply or the water supply is turned off, turn off the ice maker by holding the On/Off soft- touch icon for three (3) seconds.

•The following sounds are normal when the ice maker is operating:

-Motor running

-Ice dropping into ice bin

-Water valve opening or closing

-Running water

•When dispensing ice, you will hear a snapping or clicking sound when the ice chute opens and closes.

•If you need a large quantity of ice at one time, it is best to get cubes directly from the ice bin.

•Ice cubes stored too long may develop an odd flavor. Empty the ice bin as explained below.

•When dispensing cubed ice, it is normal to have a small quantity of little pieces along with the whole cubes.

CAUTION

If the water supply to your refrigerator is softened, be sure the softener is properly maintained. Chemicals from a water softener can damage the ice maker.

Cleaning the ice maker

Clean the ice maker and ice bin at regular intervals, especially prior to vacation or moving.

1.Turn off the ice maker.

2.Remove the ice bin by pulling straight out.

3.Empty and carefully clean the ice bin with mild detergent. Do not use harsh or abrasive cleaners. Rinse with clear water.

4.Allow the ice bin to dry completely before replacing in the freezer.

5. Replace the ice bin. Turn the ice maker on.

Remove and empty the ice bin if:

• An extended

Removing Ice Bin

power failure

(one hour or longer) causes ice cubes in the ice bin to melt and freeze together, jamming the dispenser mechanism.

•You do not use the ice dispenser frequently.

Ice cubes will freeze together in the bin, jamming the dispenser mechanism.

Remove the ice bin and shake to loosen the cubes or clean as explained above.

CAUTION

NEVER use an ice pick or similar sharp instrument to break up the ice. This could damage the ice bin and dispenser mechanism.

To loosen stuck ice, use warm water. Before replacing the ice bin, make sure it is completely dry.

IMPORTANT

When removing or replacing the ice bin, DO NOT rotate the auger in the ice bin. If the auger is accidentally rotated, you must realign the auger by turning it in 45 degree turns (see below) until the ice bin fits into place with the drive mechanism. If the auger is not properly aligned when replacing the ice bin, the refrigerator will not dispense ice. The fresh food door also may not close properly causing warm air to leak into the fresh food compartment.

Auger

Adjusting Ice Bin Auger

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Automatic Ice and Water Dispenser.…………22 Use &CareDefinitions Important Safety InstructionsFor your Safety Installation ChecklistRisk of child entrapment Child SafetyFeatures may vary according to model Features AT a GlanceDoor opening InstallationInstallation LocationTo level the freezer drawer Level Refrigerator & Adjust Doors if necessaryLeveling Freezer Drawer if necessary Guidelines for final positioning of your refrigeratorDoor stop is adjustable between 85 to Degrees To adjust the door stopAdjusting Door Install the toe grille by fitting into placeSelect models To level the doors using the adjustable lower hingeLoosen/Remove Screw where applicable Screw where applicableLoosen the screw located on the flipper mullion hinge To adjust the flipper mullionAdjusting Flipper Mullion Screw Adjusting Flipper Mullion HeightTo remove the top hinge covers Door Removal InstructionsGetting through narrow spaces To prepare for removing the doorsRemoving Freezer Drawer Install Screws Each Side Installing Freezer DrawerMounting Refrigerator Handles Installing Door HandlesDoor Handle Mounting Instructions for Frigidaire Gallery Allen wrench until there is no gap between handle and doorMounting Freezer Handle Installing Door Handles Installing Door Handles To Avoid Property Damage Connecting the Water SupplyBefore Installing The Water Supply Line, You Will Need Wrench do not overtighten. See Figure Disconnect refrigerator from electric power sourceReconnect refrigerator to electrical power source To Connect Water Supply Line To Ice Maker Inlet ValveControls Door Ajar High Temp Sabbath ModeSetting cooling temperatures Power FailUser Interface LCD Controls select modelsTurning the fresh food ice maker on and off Using the ice maker after installationAutomatic ICE & Water Dispenser Ice maker operation & careAn extended Cleaning the ice makerPower failure Ice maker/dispenser tipsIce maker tips Automatic ICE Maker FreezerOperation & Care of the Freezer Ice Maker Turning the ice maker on and offCrispers Storage FeaturesShelf features DrawersStorage bins Accessories vary by model Removable Can DispenserDoors Deli drawerRemove all items from basket To Remove Upper BasketTo Remove Lower Basket Dividers RemovalLower Basket Pivoting Divider Some models Lift up on the rear of the lower divider and pull outSpill Guard Tray should be hand washed in warm water Lower Basket Divider Spill Guard TrayIdeas for saving energy Storing Food and Saving EnergyIdeas for storing foods Understanding the sounds you may hear Normal Operating Sounds and SightsChanging the Filter Replacing your PureAdvantageTM air filter Ordering replacement filtersTo replace yourwater filter Air filter select modelsVacation and moving tips Care & CleaningProtecting your investment Ice Chute Extension Care and cleaning tipsRemoving the Ice Chute Extension For Cleaning To replace LED Lights Installing the Ice Chute ExtensionReplacing LED Lights select models Replacing Light Bulbs select modelsRefrigerator Light Ordering Replacement LED LightsTo replace light bulbs LED Light Incandescent Lights 40-watt bulbVisit our web site at Before YOU CallUnited States Canada Dispenser Ice & Water OPENING/CLOSING of DOORS/DRAWERS See Concern column Opening Moisture colLects on outside Refrigerator or800.944.9044 800.265.8352 Major Appliance WarrantyExclusions This warranty does not cover the following

FPHF2399MF, FGHF2369MF, FGUB2642LF, FGUB2642LP, FGUB2642LE specifications

The Frigidaire FGUB2642LE, FGUB2642LF, FGUB2642LP, GHF2344MF, and FPHF2399MF represent a sophisticated range of refrigerators designed to meet the diverse needs of modern kitchens. Each model combines aesthetics with advanced technology, providing both functionality and style.

Starting with the FGUB2642 series, these refrigerators feature a spacious interior with an intuitive layout that maximizes storage potential. With a capacity of 26.8 cubic feet, it offers ample room for groceries and essentials. The adjustable shelves allow you to customize the space based on your needs. Additionally, the models are equipped with dual ice makers, providing greater convenience for entertaining and daily use.

One of the highlighted technologies in these models is the Frost-Free operation. This feature eliminates the need for manual defrosting, allowing you to enjoy a hassle-free experience. Another key characteristic is the PureSource Ultra filtration system which ensures the water and ice produced from the refrigerator are clean and fresh by reducing contaminants.

Moving to the GHF2344MF, this model features a more compact design, making it suitable for smaller spaces without compromising on efficiency. It includes an advanced cooling system that maintains optimal temperatures, ensuring food stays fresh for longer periods. The bright LED lighting illuminates the interior, making it easy to find items even in low-light conditions.

The FPHF2399MF is noted for its modern design and innovative features. It includes a flexible storage system with a dedicated drawer that maintains ideal temperatures for fruits, vegetables, and deli items. The Smudge-Proof stainless steel finish not only enhances the aesthetic appeal but also makes cleaning easier, preventing fingerprints and smudges from sticking.

All models come equipped with a temperature control system that maintains consistent cooling, reducing energy consumption and promoting food preservation. They are designed to operate quietly, ensuring that your kitchen remains peaceful and serene throughout meal preparations. In summary, the Frigidaire FGUB2642LE, FGUB2642LF, FGUB2642LP, GHF2344MF, and FPHF2399MF are exemplary choices for those seeking an efficient, stylish, and feature-rich refrigeration solution that adapts to various lifestyles and kitchen designs.
Top Page Image Contents