Sonance THX Wire Gauge, Installing the Speakers, Sonafill Resonance Cancellation System, Retrofit

Page 2

Surround Back Channel Speakers

The surround back speakers in a 6.1- or 7.1-channel system should be placed on the rear wall of the listening room at the same height as the left and right surround speakers. Place the speakers from 4 feet to 8 feet apart.

Use Illustration 4 as a guide.

 

 

 

 

 

 

 

4' – 8'

 

 

 

 

5' – 7'

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Illustration 4: Surround Back Speaker Placement on Rear Wall

WIRE GAUGE

Extra resistance in the speaker wire can make a speaker sound less dynamic and reduce definition of the bass frequencies. In extreme cases, it can even attenuate high frequencies. Also, amplifier power is wasted in wire with extra resistance,reducing your system’s maximum output level.

To prevent degrading sound quality, the total wire resistance should be less than 10% of the speaker’s impedance. This means that for 8-ohm speakers like the Cinema Selects, the total resistance of the wire should be less than 0.8 ohms.

Refer to the following table when selecting the proper wire gauge for your system:

Wire resistance in Ohms vs. length of cable run

Distance in Feet

50'

100'

150'

200'

250'

300'

 

 

 

 

 

 

 

20 gauge

1.04

2.07

3.11

4.14

5.18

6.22

 

 

 

 

 

 

 

18 gauge

.65

1.30

1.96

2.61

3.26

3.91

16 gauge

.41

.82

1.22

1.63

2.04

2.45

14 gauge

.26

.52

.77

1.03

1.29

1.55

12 gauge

.16

.32

.49

.65

.81

.97

10 gauge

.10

.20

.31

.41

.51

.61

 

 

 

 

 

 

 

Note: This enclosure is not retrofittable and must be installed in new construction only.

Sonafill® Resonance Cancellation System

To reduce sound transmission to adjacent rooms and improve speaker performance when a Symphony wood acoustic enclosure cannot be used (such as in a retrofit installation), Sonance recommends installing the Sonafill® in-wall resonance cancellation system (part# 91698) in each speaker’s wall cavity. Sonafill utilizes acoustic damping tiles and acoustic absorption pillows to cancel drywall vibration and reduce the resulting coloration of the speakers’ sound. The Sonafill system can be easily retrofitted into existing walls.

INSTALLING THE SPEAKERS

New Construction

For new construction installations without Acoustic Enclosures, Sonance recommends using a Symphony FlexBracket (part#92901) to reserve a location for the speaker. The FlexBracket is nailed or screwed to the studs and serves as a guide for the drywaller so that the speaker hole will be in the desired location once the drywall is installed.

Symphony FlexBrackets are compatible with the RotoLock mounting system (see Retrofit, below).

Illustration 6 shows a FlexBracket installation example:

Retrofit

Wall Stud

FlexBracket Wing

Illustration 6: FlexBracket Installation

Sonance Cinema Select Speakers feature an integral RotoLock™ mounting system for quick mounting directly into existing walls. Once the hole is cut and the cable is run, you can install the speaker in a matter of seconds.

1. Determine the location for the speaker (see Speaker Placement).

2. Perform an obstruction survey to be certain that there are no studs,

conduit, pipes, heating ducts or air returns that will interfere with the

speaker.

3. The cutout for the Cinema Select LCR and SUR speakers is 71/16

(179mm) x 11¼” (286mm). There also must be at least 37/8” (99mm)

depth within the wall cavity for the speaker.

4. Find the cutout template provided in the speaker packaging. Position

PREPARING THE INSTALLATION LOCATION

Symphony Acoustic Enclosures

Although Sonance Cinema Select speakers are designed to be relatively insensitive to variations in enclosure volume, you can achieve the ultimate performance by installing a Symphony Acoustic Enclosure (part# 91688) for each speaker. This fully- braced enclosure is made from ½” MDF, and will deliver free-standing speaker per- formance from Cinema Select in-wall speakers.

Illustration 5: Symphony

Acoustic Enclosure

(part# 91688)

the template where the speaker is to be located and pencil an outline

on the wall.

• If you are unsure about obstructions, drill a small hole in the center

of the outline and insert a coat hanger wire into the hole to

feel-around for possible obstructions.

5. Cut the speaker hole using a drywall saw, and run the speaker wires.

6. Remove the paint plug from the speaker. Connect the speaker wire to

the terminals on the back of the speaker. Make sure to connect the

amplifier ‘+’ to the speaker ‘+’ and the amplifier ‘–’ to the speaker ‘–’.

2

Image 2
Contents Speaker Placement Parts ListOptional Accessories IntroductionSonafill Resonance Cancellation System Wire GaugeInstalling the Speakers New ConstructionIR Receiver Knockout SpecificationsPainting the Speakers and Grilles StepTechnical Assistance and Service Exclusions and Limitations

THX specifications

Sonance THX represents a pinnacle in audio technology, merging exceptional sound quality with innovative design. This brand is widely recognized for its commitment to delivering an immersive auditory experience that is essential for both home theaters and professional environments.

One of the standout features of Sonance THX speakers is their compliance with THX certification standards. This certification ensures that each speaker produces sound faithfully, mimicking the quality intended by the creator. The emphasis on accuracy means that every nuance and detail in audio playback is preserved, whether it's subtle dialogue or powerful action sequences.

Sonance THX speakers often incorporate advanced technologies that enhance their performance. They utilize high-quality drivers, which are meticulously engineered to minimize distortion and maximize clarity. This is crucial for achieving precision in high-frequency sounds as well as maintaining robust bass response. The speakers are designed to provide a wide frequency range, ensuring that listeners can enjoy a full spectrum of sound without compromising on any elements.

Moreover, Sonance integrates cutting-edge materials into their speaker design, such as polypropylene cones and silk dome tweeters. These materials contribute to better resonance control and expansive soundstage capabilities. The result is a listening experience that envelops the audience, making them feel as though they are part of the performance.

Another defining characteristic of Sonance THX is their versatility in installation. The brand provides both in-wall and on-wall options, catering to various aesthetic preferences and spatial requirements. This allows for seamless integration into home environments, ensuring that audio technology enhances rather than detracts from interior design.

Sonance THX systems also emphasize ease of use. Many models come equipped with sophisticated connectivity options, including wireless capabilities, making it simple to stream audio from various devices. This convenience is essential in today’s digital landscape, where users expect to connect effortlessly.

In summary, Sonance THX combines advanced technology, superior materials, and thoughtful design to deliver an unparalleled audio experience. With a focus on fidelity, versatility, and user-friendliness, these speakers meet the demands of discerning listeners, making them a top choice for anyone seeking high-quality sound systems. Whether for a home theater or a professional setup, Sonance THX stands out as a leader in sound quality and innovation.