Installation

This Use & Care Guide provides general operating instructions for your model. Use the appliance only as instructed in this Use & Care Guide. Before starting the appliance, follow these important ﬁrst steps.

Location

•Choose a place that is near a grounded electrical outlet. Do Not use an extension cord or an adapter plug.

•For optimal performance, it is recommended that you install the appliance where the ambient temperature is between 70 and 78 degrees Fahrenheit.

•Allow space around the unit for good air circulation. Leave a 2 inch space on the back and sides of the wine cooler for adequate circulation.

•Be sure the appliance stays in the upright position during transport.

•Keep the appliance from any hazardous or combustible agents.

NOTE

The exterior walls of the beverage cooler may become quite warm as the compressor works to transfer heat from the inside. Temperatures as much as 30° F warmer than room temperature can be expected. For this reason it is particularly important in hotter climates to allow enough space for air circulation around your appliance.

Leveling

The beverage cooler must have all bottom corners resting ﬁrmly on solid ﬂoor. The ﬂoor must be strong enough to support a fully loaded beverage cooler. NOTE: It is Very Important for your appliance to be level in order to function properly. If the appliance is not leveled during installation, the door may be misaligned and not close or seal properly, causing cooling, frost, or moisture problems.

To Level Your Beverage Cooler:

After removing all interior and exterior packaging materials, use a carpenter’s level to level the beverage cooler from front-to-back. Adjust the leveling legs in front, ½ bubble higher, so that the door closes easily

when left halfway open.

Cleaning

•Wash any removable parts of the beverage cooler interior, and exterior with mild detergent and warm water. Wipe dry. Do not use harsh cleaners on these surfaces.

•Do not use razor blades or other sharp instruments, which can scratch the appliance surface when removing adhesive labels. Any glue left from the tape can be removed with a mixture of warm water and mild detergent, or touch the residue with the sticky side of tape already removed. Do not remove the serial plate.

Important Safeguards: Do not store food in your wine cooler as interior temperature may not get cool enough to prevent spoilage. In summer months or areas of high humidity, the glass door may build up moisture. To remove the moisture, wipe it away.

Handle Installation

1.Place handle over the two mounting studs located at top of door.

2.Use hex head screw driver or Allen wrench to tighten set screws from bottom to secure handle to door.

Mounting stud

Locate handle

Set screws

MODEL #S specifications

The Frigidaire Model #S is an embodiment of modern convenience and sophisticated design, tailored to meet the demands of contemporary living spaces. This appliance is not just about aesthetics but also focuses on enhancing functionality and efficiency in the kitchen.

One of the standout features of the Frigidaire Model #S is its advanced cooling technology. Equipped with a precise temperature management system, it ensures that your food is stored at optimal temperatures, preserving freshness and flavor for longer periods. The multi-level crisper drawers are designed to maintain humidity levels, making them ideal for fruits and vegetables, ensuring they stay crisp and nutritious.

Another highlight of the Model #S is its energy efficiency. Built with environmentally conscious consumers in mind, this refrigerator boasts an Energy Star certification, which means it utilizes less energy compared to traditional appliances. This not only reduces your carbon footprint but also translates into lower electricity bills, making it an economical choice for households.

In terms of storage capacity, the Frigidaire Model #S offers a spacious interior layout. With adjustable shelves, you can easily customize your storage needs, accommodating everything from large platters to small jars. The door bins provide additional space and are perfect for storing condiments and beverages, making them easily accessible.

The appliance is also equipped with innovative smart features. The Model #S integrates seamless connectivity options, allowing users to monitor settings and receive alerts on their smartphones. This smart technology makes it possible to adjust temperatures and manage food inventory remotely, offering an unparalleled level of convenience.

Furthermore, the sleek design of the Frigidaire Model #S is complemented by fingerprint-resistant stainless steel, ensuring that your appliance maintains a pristine look without constant cleaning. The minimalist aesthetic allows it to blend seamlessly into any kitchen décor, enhancing the overall ambiance of the space.

Additional features that enhance user experience include the LED lighting, which illuminates the interior for better visibility, and the ice maker that supplies fresh ice on-demand, perfect for entertaining.

Overall, the Frigidaire Model #S stands out for its combination of modern technology, energy efficiency, and user-friendly design, making it an excellent choice for anyone looking to upgrade their kitchen appliances. Whether you are an avid cook or simply seeking to streamline your food storage needs, this model undoubtedly meets the mark.