Frigidaire Compact Refrigerator manual Installation Connecting Ice Maker To Water Supply

Page 5

Installation - Connecting Ice Maker To Water Supply

To avoid electric shock, which can cause death or severe personal injury, disconnect the refrigerator from electrical power before connecting a water supply line to the refrigerator.

To Avoid Property Damage:

•Copper tubing is recommended for the water supply line.Water supply tubing made of ¼” plastic is not recommended since it greatly increases the potential for water leaks. Manufacturer will not be responsible for any damage if plastic tubing is used for supply line.

•DO NOT install water supply tubing in areas where temperatures fall below freezing.

•Chemicals from a malfunctioning softener can damage the ice maker. If the ice maker is connected to soft water, ensure that the softener is maintained and working properly.

IMPORTANT: Ensure that your water supply line connections comply with all local plumbing codes.

Before Installing The Water Supply Line,You Will Need

•Basic Tools: adjustable wrench, flat-blade screwdriver, and PhillipsTM screwdriver

•Access to a household cold water line with water pressure between 30 and 100 psi.

•A water supply line made of ¼ inch (6.4 mm) OD, copper tubing. To determine the length of copper tubing needed, you will need to measure the distance from the ice maker inlet valve at the back of the refrigerator to your cold water pipe. Then add approximately 7 feet (2.1 meters), so the refrigerator can be moved out for cleaning (as shown).

•A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type shutoff valve.

•A compression nut and ferrule (sleeve) for connecting the water supply line to the ice maker inlet valve.

NOTE: Water line kit number 5303917950, available from your appliance dealer at additional cost, contains 25 feet (7.6 meters) of ¼ inch OD copper tubing, a saddle type shutoff valve (nonpiercing), (2) ¼ inch brass compression nuts, (2) ferrules/sleeves, and instructions for installing a water supply line.

To Connect Water Supply Line To Ice Maker Inlet Valve

1. Disconnect refrigerator from electric power source.

2. Place end of water supply line into sink or bucket. Turn ON water supply and flush supply line until water is clear. Turn OFF water supply at shut off valve.

3. Unscrew plastic cap from water valve inlet and discard cap.

4. Slide brass compression nut, then ferrule (sleeve) onto water supply line, as shown.

5. Push water supply line into water valve inlet as far as it will go (¼ inch). Slide ferrule (sleeve) into valve inlet and finger tighten compression nut onto valve. Tighten another half turn with a wrench; DO NOT over tighten.

6. With steel clamp and screw, secure water supply line to rear panel of refrigerator as shown.

7.Coil excess water supply line (about 2½ turns) behind refrigerator as shown and arrange coils so they do not vibrate or wear against any other surface.

8. Turn ON water supply at shutoff valve and tighten any connections that leak.

9. Reconnect refrigerator to electrical power source.

10. Make sure ice maker power switch is turned On (See page 14 for location of power switch).

IMPORTANT: It takes approximately 24 hours for the ice maker to begin producing ice. Air in new plumbing lines may cause ice maker to cycle two or three times before making a full tray of ice. New plumbing may cause ice to be discolored or have poor flavor. Discard ice made during the first 24 hours.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Refrigerator Please Read and Save These Instructions Welcome & CongratulationsFor Your Safety Important Safety InstructionsChild Safety Proper Disposal of Your Refrigerator or FreezerInstallation Installation Connecting Ice Maker To Water Supply Door Removal Instructions Door Removal InstructionsFeatures At a Glance Temperature Adjustment Temperature ControlsIf Temperature Displays Flash Cool Down PeriodTurning the Cooling System on and OFF Other Control FeaturesUsing the Alarm Reset Button To adjust cantilever shelves Cantilever Shelf AdjustmentLooking Inside ICE Cream Shelf Some ModelsSpecial Item Rack Some Models Adjustable Door BinsDoor Storage Tall Bottle Retainer Some Models Meat Keeper Humidity Control Some ModelsAutomatic ICE & Water Dispenser Operating Instructions Automatic Ice and Water DispenserICE Dispenser Tips ICE and Water Dispenser FeaturesHow the Water Dispenser Works Remove and empty the ice storage bin if Cleaning the ICE DispenserPage To change filter Changing the FilterEnergy Saving Ideas Food Storage & Energy Saving IdeasFood Storage Ideas Normal Operating Sounds & Sights Care & Cleaning Chart Care & CleaningReplacing Light Bulbs Vacation and Moving TipsMajor Appliance Warranty Information Before You Call Problem Cause CorrectionProblem Cause Correction ICE Dispenser Problem Cause Correction

Compact Refrigerator specifications

The Frigidaire Compact Refrigerator is an ideal solution for those seeking a combination of efficiency, functionality, and style in a small footprint. This versatile appliance is perfect for dorm rooms, offices, and small apartments, where space is limited but the need for refrigeration is essential.

One of the standout features of the Frigidaire Compact Refrigerator is its impressive capacity despite its small size. With available models offering between 1.7 to 4.5 cubic feet of storage, it provides ample room for your perishable items, beverages, and snacks. The adjustable shelving allows for customizable storage configurations, accommodating taller bottles or larger items with ease.

Equipped with a powerful cooling system, the Frigidaire Compact Refrigerator ensures rapid cooling and maintains a consistent temperature throughout its interior. Many models come with an adjustable thermostat, allowing users to customize the temperature settings based on their specific needs. This feature is particularly beneficial for keeping various food items and beverages at optimal temperatures.

Energy efficiency is a key characteristic of the Frigidaire Compact Refrigerator. Designed to consume minimal power, it not only helps to reduce electricity bills but also aligns with environmentally friendly practices. Many models meet or exceed ENERGY STAR qualifications, making them a responsible choice for energy-conscious consumers.

Another notable technology is the quiet operation of the Frigidaire Compact Refrigerator. Utilizing modern compressor technology, it minimizes noise levels, ensuring that it won’t disrupt your living or working environment. This feature makes it particularly suitable for bedrooms, study areas, or shared living spaces.

The sleek design of the Frigidaire Compact Refrigerator is also a significant advantage. Available in various colors and finishes, including stainless steel and classic white, it can seamlessly blend with any decor. The door is often reversible, allowing flexible installation options to fit your space perfectly.

The compact model also includes a separate freezer compartment in select versions, providing additional storage for ice or frozen meals. This feature adds to the versatility of the unit, making it not just a fridge but a comprehensive food storage solution.

In summary, the Frigidaire Compact Refrigerator delivers on multiple fronts, combining efficient cooling performance, energy savings, and stylish design in a compact form. It's the perfect choice for anyone looking to maximize their living space without compromising on quality or functionality.
Top Page Image Contents