Installation, Location, Leveling, Cleaning

Installation

This Use & Care Guide provides general operating instructions for your model. Use the refrigerator only as instructed in this Use & Care Guide. Before starting the wine cooler, follow these important first steps.

Location

•Choose a place that is near a grounded electrical outlet. Do Not use an extension cord or an adapter plug.

•For optimal performance, it is recommended that you install the wine cooler where the ambient temperature is between 70 and 78 degrees fahrenheit.

•Allow space around the unit for good air circulation. Leave a 2 inch space on the back and sides of the wine cooler for adequate circulation.

•Be sure the wine cooler stays in the upright position during transport.

•Keep the wine cooler from any hazardous or combustible agents.

NOTE

The exterior walls of the wine cooler may become quite warm as the compressor works to transfer heat from the inside. Temperatures as much as 30° F warmer than room temperature can be expected. For this reason it is particularly important in hotter climates to allow enough space for air circulation around your wine cooler.

Leveling

The wine cooler must have all bottom corners resting firmly on solid floor. The floor must be strong enough to support a fully loaded wine cooler. NOTE: It is Very Important for your wine cooler to be level in order to function properly. If the wine cooler is not leveled during installation, the door may be misaligned and not close or seal properly, causing cooling, frost, or moisture problems.

To Level Your Wine Cooler:

After removing all interior and exterior packaging materials, use a carpenter’s level to level the wine cooler from front-to-back. Adjust the leveling legs in front, ½ bubble higher, so that the door closes easily when left

halfway open.

Cleaning

•Wash any removable parts of the wine cooler interior, and exterior with mild detergent and warm water. Wipe dry. Do not use harsh cleaners on these surfaces.

•Do not use razor blades or other sharp instruments, which can scratch the appliance surface when removing adhesive labels. Any glue left from the tape can be removed with a mixture of warm water and mild detergent, or touch the residue with the sticky side of tape already removed. Do not remove the serial plate.

Important Safeguards: Do not store food in your wine cooler as interior temperature may not get cool enough to prevent spoilage. In summer months or areas of high humidity, the glass door may build up moisture. To remove the moisture, wipe it away.

242101800 specifications

The Frigidaire 242101800 is a high-quality replacement part designed specifically for various models of refrigerators. This component, commonly known as the refrigerator door gasket, plays a vital role in ensuring the optimal performance of your appliance. Its significance cannot be overstated, as it directly impacts energy efficiency, temperature maintenance, and overall appliance reliability.

One of the main features of the Frigidaire 242101800 is its durable construction. Designed from high-quality materials, the gasket is both resilient and flexible, allowing it to create a tight seal between the refrigerator door and the cabinet. This helps to prevent cold air from escaping and keeps warm air from entering, ensuring that your food remains fresh for longer periods. The gasket is crafted to withstand daily wear and tear, making it a reliable long-term solution for your refrigerator.

In terms of technology, the Frigidaire 242101800 incorporates advanced design features that enhance its functionality. The gasket is engineered to fit seamlessly into specific Frigidaire refrigerator models, ensuring a precise fit that maximizes efficiency. Installation is straightforward, catering to DIY enthusiasts and homeowners alike. With a few simple tools, users can replace the old, worn-out gasket with this new part, restoring energy efficiency and improving the overall functionality of their refrigerator.

Another notable characteristic of the Frigidaire 242101800 is its compatibility with a wide range of refrigerator models. This versatility means that homeowners with different Frigidaire appliances can benefit from this high-quality gasket. Ensuring compatibility with existing models allows for fewer misplaced parts and ensures that consumers are getting a reliable replacement every time.

In conclusion, the Frigidaire 242101800 is an essential component for maintaining refrigerator efficiency and performance. Its durable construction, advanced design features, and wide compatibility make it a popular choice among homeowners seeking to improve their appliance's functionality. Investing in this replacement part not only enhances the longevity of your refrigerator but also contributes to better energy savings and increased food preservation. For those looking to maintain or restore their Frigidaire refrigerator's performance, the 242101800 gasket is a highly recommended solution.