Microwave Specifications

Microwave

FPMV189K F Over-The-Range

•Product Shipping Weight (approx.) – 70 Lbs.

•Voltage Rating – 120V / 60 Hz / 15 Amps

•Connected Load (kW Rating) @ 120 Volts = 1.65 kW

(For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation.)

•Amps @ 120 Volts = 14.3 Amps

•Always consult local and national electric codes.

•Grounded outlet should be located in cabinet above, with hole in base to route power cord. Carefully follow top template instructions for power cord clearance when installing beneath smooth, flat cabinets.

•Microwave’s exhaust ventilation system is preset to recirculate air inside with no ducting system required. Exhausting air outside is optional, using either vertical or horizontal ducting system. (Refer to Ducted Option Specifications for outside ventilation.)

•For safe and proper installation, microwave MUST be mounted to BOTH a top cabinet AND a wall, and connected to at least one wall stud. Can NOT be installed in island or peninsula cabinet arrangements.

•Cabinet bottom MUST be level to insure proper installation.

•Cabinet MUST be capable of supporting a total load of 110 lbs.

•Filler blocks recommended for installation when cabinet front hangs below recessed bottom shelf.

•Minimum distance of 30" required from cooking surface to bottom edge of top cabinet.

•Minimum distance of 66" required from floor to top of microwave.

•Opening between cabinets MUST be 30" wide and free of obstructions. For openings up to 36" wide, order optional 36" Filler Panel Kit to fill in gap between unit and cabinets.

•Allow 26" minimum clearance for 90° door swing.

Ducted Option Specifications

•For outside ventilation.

•Exhaust duct adapter will be needed for outside ventilation, to mate with standard 3-1/4" x 10" rectangular duct. If round duct required, rectangular-to-round transition adapter will be needed with no less than 6" diameter.

•For most efficient airflow exhaust, use a straight run or as few elbows as possible with a maximum duct length of 3-1/4" x 10" rectangular or 6" diameter round duct, not to exceed 140 equivalent feet.

•For horizontal installation, be sure to allow enough space between wall studs to accommodate exhaust.

•Refer to installation instructions on web for detailed duct preparation and converting exhaust vent blower system for exterior exhaust ventilation.

Note: For planning purposes only. Refer to Product Installation Guide on the web at frigidaire.com for detailed instructions.

Optional Accessories

•36" Stainless Steel Filler Panel Kit – (PN # MWFILKTSS).

FRIGIDAIRE®

USA • 250 Bobby Jones Expressway • Martinez, GA 30907 • 1-800-FRIGIDAIRE • frigidaire.com	Specifications
CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca	subject to change.

FPMV189K 05/09

Printed in the U.S.A.

FPMV189K, FPMV189KF specifications

The Frigidaire FPMV189KF and FPMV189K are modern over-the-range microwaves that combine functionality, performance, and convenience in a sleek design. These versatile appliances are designed to fit seamlessly into any kitchen while providing a variety of features that enhance cooking and meal preparation.

One of the standout features of both models is their 1.9 cu. ft. capacity, offering ample space for heating, cooking, and defrosting larger dishes. The microwaves are equipped with a powerful 1000-watt cooking power, ensuring quick and efficient cooking times. This high wattage means users can enjoy rapid heating of leftovers or expedient cooking of meals, saving valuable time in the kitchen.

The FPMV189KF and FPMV189K are designed with a range of pre-programmed settings for various popular foods. This convenience allows for easy operation as users can select options for popcorn, pizza, fresh vegetables, and more, eliminating guesswork in cooking times. The one-touch buttons make accessing these features straightforward, even for those who aren't as experienced in the kitchen.

Another notable characteristic is the microwave's sensor cooking technology. This innovative feature automatically adjusts cooking time and power levels based on the moisture released from the food, helping to prevent overcooking and ensuring perfectly cooked meals every time.

For added convenience, both models feature a dishwasher-safe grease filter that effectively traps grease and helps maintain the cleanliness of the kitchen. The microwave also includes a built-in fan that provides ventilation, maintaining air quality and reducing kitchen smoke.

In terms of design, the Frigidaire FPMV189KF features a stainless steel finish, lending a modern touch to any kitchen décor. The sleek appearance, combined with functional design elements such as easy-to-read controls and bright LED lighting, enhances usability while keeping the microwave looking sharp.

Energy efficiency is also a consideration, as both models are designed to consume minimal energy during operation. This not only saves on electricity costs but also aligns with increasing consumer demand for eco-friendly appliances.

With a combination of performance, versatility, and aesthetic appeal, the Frigidaire FPMV189KF and FPMV189K stand out as strong contenders in today's kitchen appliance market, catering to a diverse array of culinary needs while providing reliable cooking solutions.