Frigidaire RH30WC55GS, RH36WC55GS Electrical & Installation requirements, Electrical requirements

Page 5

Important safety Instructions - Electrical & Installation

5

requirements

READ AND SAVE THESE INSTRUCTIONS

 

Electrical & Installation requirements

 

Electrical requirements

IMPORTANT

Observe all governing codes and ordinances.

It is the customer’s responsibility:

To contact a qualified electrical installer.

To assure that the electrical installation is adequate and in conformance with National Electrical Code, ANSI/NFPA 70 — latest edition*, or CSA Standards C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No.0-M91 - latest edition** and all local codes and ordinances.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

Do not ground to a gas pipe.

Check with a qualified electrician if you are not sure range hood is properly grounded.

Do not have a fuse in the neutral or ground circuit.

IMPORTANT

Save Installation Instructions for electrical inspector’s use.

The range hood must be connected with copper wire only.

The range hood should be connected directly to the fused disconnect (Or circuit breaker) box through metal electrical conduit.

Wire sizes must conform to the requirements of the National Electrical Code ANSI/NFPA 70 — latest edi- tion*, or CSA Standards C22.1-94, Canadian Electri- cal Code Part 1 and C22.2 No. 0-M91 - latest edi- tion** and all local codes and ordinances.

A U.L.- or C.S.A.-listed conduit connector must be provided at each end of the power supply conduit (at the range hood and at the junction box).

Copies of the standards listed may be obtained from:

*National Fire Protection Association Batterymarch Park Quincy, Massachusetts 02269

**CSA International 8501 East Pleasant Valley Road Cleve- land, Ohio 44131-5575

Before installing the hood

1.For the most efficient air flow exhaust, use a straight run or as few elbows as possible.

Vent unit to outside of building, only.

2.At least two people are necessary for installation.

3.The hood is fitted with Screws and Drywall Anchors suitable for most surfaces, consult a Qualified Installer, check if they perfectly fit with your cabinet/wall.

4.Do not use flex ducting.

5.COLD WEATHER installations should have an additional backdraft damper installed to minimize backward cold air flow and a nonmetallic thermal break to minimize conduction of outside temperatures as part of the ductwork. The damper should be on the cold air side of the thermal break.

The break should be as close as possible to where the ducting enters the heated portion of the house.

6.Make up air: Local building codes may require the use of Make-Up Air Systems when using Ducted Ventilation Systems greater than specified CFM of air movement.

The specified CFM varies from locale to locale. Consult your HVAC professional for specific requirements in your area.

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Installation, Use & Care Guide Please read and save this guide Table of contentsKeep a record for quick reference Questions?Important Safety Instructions Read and Save These Instructions Electrical requirements Electrical & Installation requirementsList of Materials Optional AccessoriesParts Included with your Hood Tools/Materials requiredInstalling preparation Installing the hoodWall framing for adequate support Removing the packagingExamples of possible ducting Ductwork installation guidelinesDuctwork and wiring locations Mounting the duct cover bracket House wiring locationCeiling ducting Wall ductingIMPORTANT- Framing must be capable of supporting 100 lbs Install framing for hood supportMounting the hood Connecting the ductwork Air deflector installation Recirculating accessoriesFailure to do so can result in death or electrical shock Making the electrical connections120 VAC, 15 or 20 Amp circuit required Mounting the duct cover Features Control buttons Special functions For Best results Lights Care and cleaningFilters Cleaning Charcoal filter placement Recirculating accessoriesOptional Charcoal Filters Hood SurfaceElectrolux Home Products North America Exclusions This warranty does not cover the followingRESPONSIBILITIESresponsible for the items listed below

316488524, EI36WC55GS, EI30WC55GS, RH36WC55GS, RH30WC55GS specifications

Frigidaire has made a name for itself in the realm of kitchen appliances, and models like the EI36WC55GS, EI30WC55GS, RH36WC55GS, 316488524, and RH30WC55GS stand as testament to their innovation and quality. These high-efficiency wall ovens and ranges are designed with modern households in mind, blending functionality with streamlined aesthetics.

One of the main features of these Frigidaire models is their advanced cooking technology. Each unit is equipped with a state-of-the-art convection cooking system that circulates hot air for even baking results. This technology ensures that food is cooked thoroughly and consistently, eliminating the common issue of hot spots that can lead to uneven baking. Additionally, the ovens feature multiple cooking modes, allowing users to select the best option for their specific dish, whether they are baking, broiling, or roasting.

The design of these appliances also reflects practicality. With spacious interiors, they offer ample room to cook multiple dishes simultaneously, making them ideal for families and home chefs who enjoy entertaining. Specific models come with customizable storage options, allowing users to arrange their cooking environment according to their personal preferences.

In terms of convenience, Frigidaire has integrated smart technologies into these models. The ovens can be connected to Wi-Fi, enabling users to preheat, adjust settings, and monitor cooking progress remotely via a smartphone app. This feature adds a layer of flexibility, catering to the busy lifestyles of today’s consumers.

Cleaning is made easy with the addition of self-cleaning cycles, which utilize high temperatures to burn off food residues, allowing users to enjoy a pristine oven without the hassle of scrubbing.

Energy efficiency is another hallmark of these Frigidaire models. They are designed to consume less electricity while delivering high performance, making them environmentally friendly options for the eco-conscious consumer.

Overall, the Frigidaire EI36WC55GS, EI30WC55GS, RH36WC55GS, 316488524, and RH30WC55GS outlets blend cutting-edge technology, user-friendly features, and sleek design, creating a perfect balance that enhances the cooking experience in any modern kitchen. With their robust capabilities, they are versatile choices for anyone looking to elevate their culinary endeavors.
Top Page Image Contents