Frigidaire HV2736B Install Ductwork Wiring Diagram, Install Cooktop, Install Electrical Wiring

Page 4

INSTALL DUCTWORK

 

WIRING DIAGRAM

CAUTION - BEFORE CUTTING HOLE IN CABINET FOR DUCT- WORK: Check for interference with floor joists, wall studs, electrical wiring or plumbing.

BLOWER

SCREWS

3-1/4" X 10"

TO 6" RD.

TRANSITION

COLLAR

6" RD.

ELBOW & DUCTWORK

INSTALL COOKTOP

1.Align the cooktop with the downdraft and fasten cooktop in place.

1.Cut hole in cabinet as well as holes in wall or floor as necessary.

2.Mount the roof or wall cap and work back towards the cabinet, attaching all ductwork, elbows and transitions as previously planned. Tape all ductwork connections to make them secure and air tight.

3.Connect ductwork (and transition, if required) to downdraft. If necessary, LOOSEN nuts and screws that hold the blower in place, and slide blower left or right to meet ductwork. Re- tighten screws and nuts.

Note: A 3-1/4" x 10" collar is provided for installers who prefer to rivet the ductwork to the unit. This will allow blower to be removed and replaced easily in service situations without disturbing ductwork.

INSTALL ELECTRICAL WIRING

1.Mount a standard wiring box, with 3-pronged receptacle, inside the cabinet. Make sure the downdraft’s power cord can easily reach it.

2.Run appropriate power cable into cabinet and connect it to receptacle.

3.Plug the downdraft’s power cord into the outlet.

Note: Accurate alignment of cooktop and downdraft is necessary to ensure that there is no interference when air vent is raised and lowered. There should be a gap of 1/32"-1/16" between the back of the cooktop and the front of the downdraft cover.

ADJUSTMENT

The downdraft is factory-adjusted for proper operation. How- ever, shipping and handling may affect the position of the activating switch.

To adjust position of activating switch:

WARNING: To avoid possible electrical shock, personal injury or death - Disconnect electrical power.

1.If downdraft is plugged into electrical outlet, unplug it.

2.Lift air vent straight up and cock it slightly so it remains in the UP position.

SWITCH

MEMBRANE

 

SCREWS

SWITCH

SWITCH

BRACKET

COVER

3.Remove switch cover from right end of air vent.

4.Loosen the 2 screws holding the switch bracket in place. Position switch bracket so that activating switch just comes in contact with underside of switch membrane. Tighten screws.

5.Replace switch cover, gently lower air vent into chimney, and

plug in power cord. Re-connect electrical power and check

4operation.

Image 4
Contents Downdraft Blower System PlanningSpecifications Plan the WiringTake Measurements Plan the DuctworkPreparation Mount the UnitLoosen the 4 nuts and 2 clamp channels Remove the 4 nuts and 2 clamp channelsInstall Ductwork Wiring Diagram Install CooktopInstall Electrical Wiring AdjustmentUSE and Care ControlsFrigidaire Range Warranty 99041984L

HV2730B, HV2736B specifications

The Frigidaire HV2736B and HV2730B are two innovative and highly efficient refrigerator models that combine modern design with advanced technology to enhance user experience and convenience. Both models are designed to cater to the needs of contemporary households, providing ample storage space while maintaining energy efficiency.

One of the standout features of the Frigidaire HV2736B and HV2730B is their spacious interiors. These refrigerators offer a thoughtfully designed layout that maximizes organization. Adjustable shelves allow users to customize the storage space according to their needs, accommodating larger items with ease. Additionally, the crispers are specially designed to maintain optimal humidity levels for fruits and vegetables, ensuring they remain fresh for an extended period.

Energy efficiency is a key characteristic of both models, as they are ENERGY STAR certified. This means they consume less electricity compared to standard refrigerators, ultimately helping users save on energy bills while being environmentally friendly. The advanced cooling technology employed in these refrigerators provides a uniform temperature throughout the unit, preventing any hotspots that can spoil food.

In terms of convenience, the Frigidaire HV2736B and HV2730B come equipped with features such as a water and ice dispenser located on the exterior. This allows users to easily access chilled water and ice cubes without having to open the refrigerator door, conserving energy and promoting convenience. Additionally, both models have an integrated LED lighting system that illuminates the interior, making it easy to find items even in low-light conditions.

Another notable characteristic of these models is their quiet functioning. Utilizing cutting-edge compressor technology, these refrigerators operate quietly, making them ideal for open-concept living spaces where noise can be a consideration.

Moreover, the Frigidaire HV2736B and HV2730B include smart technology integration, allowing users to monitor and control the temperature settings remotely. This added feature integrates seamlessly with mobile devices, providing greater flexibility and control.

In conclusion, the Frigidaire HV2736B and HV2730B stand out in the competitive refrigerator market due to their combination of spacious interiors, energy efficiency, innovative cooling technologies, and convenient features. Both models are designed to meet the demands of modern living, making them excellent choices for any household looking for reliable and efficient refrigeration solutions.