Roksan Audio Kandy MkIII user manual U T I O N S, AC Mains Supply, General Cautions

Page 4

 

C A U T I O N S

K a n d y Integrated CD Player

 

 

 

 

 

 

 

AC MAINS SUPPLY

Your Kandy CD Player is set to operate from a fixed supply voltage which is marked on a label next to the mains input plug. Before connecting the mains lead please check that your mains supply corresponds to this label as below:

230V Products

………………………………….Voltage Range: 220V

– 240V

115V Products

………………………………….Voltage Range:

110V

– 120V

100V Products

………………………………….Voltage Range:

90V

– 110V

The mains lead supplied with this product has an IEC mains socket which plugs into the IEC connector on the unit’s rear panel. The other end is normally attached to the appropriate mains plug for your country. In the UK this is the standard UK13A plug.

This plug should ordinarily not be removed from the lead. If you do remove it, please dispose of it safely so that it cannot be plugged into a mains socket whilst in a potentially dangerous condition. We suggest that you obtain from your dealer a complete replacement lead.

Should you move to another area where either the mains voltage or the mains plugs are different from those as supplied with your CD Player, please contact the appointed ROKSAN distributor for assistance.

Please observe correct mains polarity at all times.

The CD Player mains fuses are located on the rear panel next to the IEC mains connector. They must only be replaced by the fuse of the type and rating as described on the fuse rating label on the rear panel of the unit.

This product requires connection to earth (ground). The earth wire (in the UK this is colour coded green/yellow) of the mains cable supplied with your CD Player must be connected to a suitable earthing point established for this purpose by your electricity supply company. If you are in any doubt, consult a qualified electrician.

If the equipment is likely to be unused for some time, unplug it from the mains supply.

GENERAL CAUTIONS

FCC WARNING

This equipment may generate or use Radio Frequency energy. The user may lose the right to operate this equipment if unauthorised modifications are made.

INTERFERENCE

Properly installed, this unit should not cause harmful interference to radio communications, There is, however, no guarantee that such interference will not occur in a specific installation. If interference arises (which you can determine by switching the unit off and on) you could try to remedy matters by the following:

•Re-orient or re-locate the receiving antenna

•Increase the distance between the CD Player and receiver

•Connect the unit to a different mains circuit from that of the receiver

•Consult your ROKSAN appointed dealer or an experienced Radio/TV technician for help and advice

LOCATION

Your Kandy CD Player should be located in a well ventilated area and kept away from sources of heat, dust and humidity and from direct sunlight.

The CD Player may be positioned either as a free standing unit or alongside another audio/video product. Never place the CD Player on carpet or any surface likely to hinder normal ventilation.

Never allow liquids or other objects to fall into the unit.

This unit contains no user serviceable parts. Do Not remove any panels or attempt to service it yourself. Unauthorised servicing will void the warranty.

Roksan Audio ltd

Kandy Integrated CD Player MkIII User Manual

CLASSIFICATION: General Use

Version 2.00

All specifications are liable to change without notice. E&OE

Page 4 of 11

ENGLISH

Page 3 Page 5
Image 4
Page 3 Page 5
Contents N d y K S a N a U D I O L I M I T E DSafety Certification Laser Diode PropertiesMaintenance T R O D U C T I O NUnpacking EU DirectivesU T I O N S AC Mains SupplyGeneral Cautions Please observe correct mains polarity at all timesInstallation Analogue Output Left & RightT U P OperationPlaying a Disc Selecting a TrackIndicates track No. and how long it has been playing Indicates track No. and remaining time on the trackRemote Control Numeric Keys CD Numeric KEY Selector‘REPEAT A’ ‘REPEAT B’Troubleshooting GuaranteeSpecification S Kandy CD Player MkIIIPurchase Date Roksan Retailer

Kandy MkIII specifications

The Roksan Audio Kandy MkIII is an exceptional addition to any audiophile's repertoire, merging classic design with modern technology to deliver stunning audio performance. Renowned for its powerful amplification and refined sound quality, the Kandy MkIII is a staple in Roksan's product lineup, embodying the brand's dedication to high-fidelity audio.

At the core of the Kandy MkIII is its robust integrated amplifier, which produces an impressive output of up to 150 watts per channel. This formidable power allows it to drive even the most demanding loudspeakers with ease, ensuring that music lovers can enjoy their favorite tracks at any volume without distortion. The amplifier's advanced circuitry is designed to minimize interference and deliver clean sound, making it perfect for various listening environments.

One of the standout features of the Kandy MkIII is its multiple input options, catering to both analog and digital sources. It boasts several line-level inputs, a dedicated phono stage for vinyl enthusiasts, and a built-in digital-to-analog converter (DAC). This versatility allows users to connect a range of devices, from turntables and CD players to digital streamers, ensuring a seamless listening experience no matter the source.

Additionally, the Kandy MkIII is equipped with Roksan's proprietary technology, which includes a sophisticated power supply design that enhances performance and stability. The use of high-quality components, such as premium capacitors and resistors, further contributes to its superior sound reproduction, allowing for a detailed and dynamic audio experience.

Aesthetically, the Kandy MkIII features a sleek and modern design, with a minimalist front panel that reflects Roksan's commitment to quality. Its solid build construction not only enhances durability but also minimizes resonance, ensuring that the focus remains on the music.

The Kandy MkIII also incorporates a remote control, providing convenience and ease of use for listeners who prefer to adjust their settings from a distance. The intuitive layout of the controls is user-friendly, allowing for quick access to volume adjustments and input selections.

In summary, the Roksan Audio Kandy MkIII is a powerful and versatile integrated amplifier that appeals to discerning listeners. With its combination of high-quality components, advanced technologies, and thoughtful design, it provides an engaging audio experience that is hard to surpass. Whether you're a seasoned audiophile or a casual listener, the Kandy MkIII is sure to elevate your music enjoyment to new heights.
Top Page Image Contents