Manual Operation
Heating with multiple cooking stages
For best results, some microwave recipes call for different power levels or different lengths of time for cooking. Your microwave may be set to change from one stage to another automatically (2 stages maximum).
Example: to cook food at 80%power for 3 minutes and then 50% power for 6 minutes 30 seconds:
Adding cook time (+30sec)
Pressing the START/+30sec pad once starts 30 seconds of cooking at a 100% power level.
Pressing the START/+30sec pad during cooking adds 30 seconds (for each press) to the cook time..
Example: to add 1 minute of cook time at the power level of 100%:
1.Press "COOK TIMER" once."00:00" displays.
2.Use the number pads to enter heating time for the 1st stage (cook time may be set up to 99 minutes and 99 seconds).
3.Press Power Level pad once for power level 10(100% power).
4.Use the number pads to enter power level for the 1st stage. PL8 appears in the display (80% power).
5.Press "COOK TIMER" pad.
6.Use the number pads to enter heating time for the 2nd stage (cook time may be set up to 99 minutes and 99 seconds).
7.Press Power Level for the 2nd stage.
8.Use the number pads to enter power level for the 2nd stage. PL5 appears in the display (50% power).
9.Press START/+30sec pad.
When finished, you will hear a series of beeps.
NOTE:
1.The “Auto Menu” can’t be set as one of multiple cooking.
1. Press START/+30sec pad 2 times.
NOTE: The “+30sec” function is not available when using the “weight defrost” or any of the “convenience operation” features.
Setting Defrost by Weight
Example: to defrost 0.5 lbs. of food using the automatic defrost cycle (cook time determined automatically)
1. Press Defrost Weight pad
2.Use the number pads to enter weight of food to defrost in pounds. You may enter weight from 0.3 to 6.3 pounds.
3. Press START/+30sec pad.
When defrosting has finished, you will hear a series of beeps.
NOTE: The weight amount must be a valid entry for this feature to start. A valid weight entry is 0.3 to 6.3 pounds A decimal point is assumed before the last digit you enter. For example, enter 0,5 for 0.5 pounds and enter 5 for 5.0 pounds.
2.If the 1st stage is the set defrost feature, the 2nd stage can’t be set to Defrost again. If one of the stages is weight defrost, that will be the 1st stage when cooking starts.
Setting Defrost by Time
Example: to defrost food with the automatic defrost cycle for 5 minutes:
1. Press Defrost Time pad
2.Use the number pads to enter desired defrost time (defrost time may be set up to 99 minutes and 99 seconds).
3.Press START/+30sec pad.
When defrost has finished, you will hear a series of beeps.
10