AC Mains Supply, General Cautions | Roksan Audio MK111 guide

	CAUTIONS	K a n d y Integrated CD Player

AC MAINS SUPPLY

Your Kandy CD Player is set to operate from a fixed supply voltage which is marked on a label next to the mains input plug. Before connecting the mains lead please check that your mains supply corresponds to this label as below:

230V Products	………………………………….Voltage Range: 220V – 240V
115V Products	………………………………….Voltage Range: 100V – 120V

The mains lead supplied with this product has an IEC mains socket which plugs into the IEC connector on the unit’s rear panel. The other end is normally attached to the appropriate mains plug for your country. In the UK this is the standard UK13A plug.

This plug should ordinarily not be removed from the lead. If you do remove it, please dispose of it safely so that it cannot be plugged into a mains socket whilst in a potentially dangerous condition. We suggest that you obtain from your dealer a complete replacement lead.

Should you move to another area where either the mains voltage or the mains plugs are different from those as supplied with your CD Player, please contact the appointed ROKSAN distributor for assistance.

Please observe correct mains polarity at all times.

The CD Player mains fuses are located on the rear panel next to the IEC mains connector. They must only be replaced by the fuse of the type and rating as described on the fuse rating label on the rear panel of the unit.

This product requires connection to earth (ground). The earth wire (in the UK this is colour coded green/yellow) of the mains cable supplied with your CD Player must be connected to a suitable earthing point established for this purpose by your electricity supply company. If you are in any doubt, consult a qualified electrician.

If the equipment is likely to be unused for some time, unplug it from the mains supply.

GENERAL CAUTIONS

FCC WARNING

This equipment may generate or use Radio Frequency energy. The user may lose the right to operate this equipment if unauthorised modifications are made.

INTERFERENCE

Properly installed, this unit should not cause harmful interference to radio communications, There is, however, no guarantee that such interference will not occur in a specific installation. If interference arises (which you can determine by switching the unit off and on) you could try to remedy matters by the following:

•Re-orient or re-locate the receiving antenna

•Increase the distance between the CD Player and receiver

•Connect the unit to a different mains circuit from that of the receiver

•Consult your ROKSAN appointed dealer or an experienced Radio/TV technician for help and advice

LOCATION

Your Kandy CD Player should be located in a well ventilated area and kept away from sources of heat, dust and humidity and from direct sunlight.

The CD Player may be positioned either as a free standing unit or alongside another audio/video product. Never place the CD Player on carpet or any surface likely to hinder normal ventilation.

Never allow liquids or other objects to fall into the unit.

This unit contains no user serviceable parts. Do Not remove any panels or attempt to service it yourself. Unauthorised servicing will void the warranty.

Roksan Audio ltd	Kandy Integrated CD Player MkIII User Manual
CLASSIFICATION: General Use	Version 1.00

All specifications are liable to change without notice. E&OE

Page 4 of 11

ENGLISH

MK111 specifications

The Roksan Audio MKIII series amplifies the brand's commitment to high-fidelity audio performance while incorporating advanced technological innovations. Designed for audiophiles seeking both superior sound quality and contemporary aesthetics, the MKIII is a testament to Roksan's expertise in sound engineering.

At the heart of the Roksan Audio MKIII is its class-leading amplification technology. Employing a high-current, low-negative feedback design, the MKIII produces a sheer power output that seems effortless, driving even the most demanding speakers with precision and control. The dual-mono configuration ensures that the left and right channels remain isolated, delivering an enhanced stereo image and superior clarity across the frequency spectrum.

One of the key features of the Roksan MKIII is its extensive connectivity options. The amplifier is equipped with a range of inputs, including multiple line-level connections, a dedicated phono stage for vinyl enthusiasts, and a digital input for direct integration with digital audio sources. This versatility makes it an excellent choice for users with varied audio sources, promoting an all-encompassing listening experience.

The MKIII also boasts a custom-designed power supply, which plays a crucial role in maintaining stability and performance during high-demand playback. With a robust transformer and meticulously designed PCB layouts, the MKIII minimizes electrical noise and distortion, ensuring that purity of sound is maintained.

Roksan has paid close attention to the aesthetic elements of the MKIII as well. Its elegant design features a sleek, minimalist front panel with a user-friendly interface and high-quality components. The solid aluminum construction not only enhances aesthetics but also contributes to the overall durability of the unit.

Additionally, the MKIII series is engineered to remain upgradeable, allowing users to enhance functionalities over time. Its modular architecture may accommodate future advancements in audio tech, thus safeguarding the investment in high-fidelity sound.

In conclusion, the Roksan Audio MKIII offers an engaging blend of advanced sound engineering, versatile connectivity, and stylish design. Its commitment to high performance and user satisfaction has solidified its reputation within the audio community, appealing to both seasoned audiophiles and newcomers who desire an exceptional music listening experience.

K a n d y Integrated CD Player