Manual Operation

Setting the timer

Example: setting timer for 5 minutes:

1. Touch timer pad once.

2. Enter desired time using number pads.

3. Touch START/+30sec pad.

When the timer has reached the end of set time, you will hear beep alerts indicating the timer has run out.

Control Lock

You may lock the control panel to prevent the microwave from being accidentally started or used by children.

The control lock feature is very useful when cleaning the control panel. The lock will prevent accidental programming when wiping the control panel clean.

Example: to set the control lock ON:

Touch and hold the STOP/cancel pad for more
than 3 seconds. The lock icon will appear in the
display window with 2 beeps.	hold for 3
	seconds

Example: to change the control lock from ON to OFF:

Touch and hold the STOP/cancel pad for more than 3 seconds. The lock icon will disappear in the display window with 2 beeps.

hold for 3 seconds

Heating with high power level

Example: to heat for 5 minutes at 100% power:

1. Press cook time pad.

2.Use the number pads to enter desired heating time (cook time may be set up to 99 minutes and 99 seconds).

3. Touch START/+30sec pad.

When heating has finished you will hear 5 beeps and the time of day will display.

Heating with lower power levels

Using the highest power level to heat foods with does not always give the best results when some types of food need slower cooking, such as roasts, baked goods or custards. Your oven has nine other power levels you may choose.

Example: to heat for 4 minutes at 70% power:

1. Press cook time.

2.Use the number pads to enter desired heating time (cook time may be set up to 99 minutes and 99 seconds).

3. Press power level pad once for power level 10 (100% power).

Using EasySet

Microwave heating or cooking may be quickly set at 100% power level for 1, 2 or 3 minutes. Use the number keys 1, 2 or 3 to choose the desired minutes of cook time (this option will only work using the 1, 2 or 3 numeric pads):

Example: to quickly heat for 2 minutes at 100% power:

Touch number pad for desired minute(s).The microwave will start immeadiately.

Note: the “EasySet” function cannot be set when using the “weight defrost” feature.

4.Use the number keys to change the power level to 7. PL7 appears in the display (70 % power).

5. Press START/+30sec pad.

When heating has finished you will hear 5 beeps and the time of day will display.