Frigidaire 316495060 manual Oven Installation, Mounting Plate, Mounting Oven to the Wall

Page 6

INSTALLATION INSTRUCTIONS

(B)

Fan Blade Openings

(A) Rotate 90°

Figure 13

Figure 14

9 OVEN INSTALLATION

THIS OVEN CANNOT BE PROPERLY INSTALLED WITHOUT REFERRING TO THE MOUNTING INSTRUCTIONS FOUND ON BOTH TEMPLATES.

THE NEXT STEP IS TO READ AND FOLLOW MOUNTING INFORMATION ON BOTH TOP CABINET AND WALL TEMPLATES.

NOTE: THIS OVEN SHOULD BE ATTACHED TO AT LEAST ONE WALL STUD.

MOUNTING PLATE

1.Separate Toggle Nuts, packed in the INSTALLATION HARDWARE, from 4 Toggle Bolts.

2.IMPORTANT Use the mounting template provided to Use wood screws to attach mounting plate to the stud or studs. Use Toggle Bolts to attach mounting plate through the holes at A, B, C and D UNLESS THOSE HOLES ARE LOCATED ON THE STUD. Insert one Toggle Bolt into A, B, C and D where appropriate (these correspond to holes of the Wall Template) and put the Toggle Nuts onto the Toggle Bolts. See Figure 15. Refer to instructions in Wall Template.

SUITABLE FOR USE ABOVE GAS OR ELECTRICAL

COOKING EQUIPMENT 36 INCHES OR LESS WIDE

WARNING TO REDUCE THE RISK OF FIRE AND

ELECTRICAL SHOCK,INSTALL AT LEAST 13-3/16 INCHES

ABOVE A RANGE (OR COOK TOP)

A CD B

3.Position the Mounting Plate with the Toggle Bolts attached at the wall location and insert Toggle Nuts and Bolts through the holes in the wall with the Toggle Nuts closed. See Figure 16. Use Wood Screws to attach the Mounting Plate to studs.

NOTE: Before insertion, be sure you leave a space more than the thickness of the wall between the Mounting Plate and the end of each of the Toggle Nuts (in the closed position). If you do not leave enough space, the Toggle Nut will not be able to open on the other side of the wall. Also, once a Toggle Nut opens, it cannot be withdrawn from the hole; therefore make sure all of the Toggles are in the correct position before insertion.

4.Align the Mounting Plate carefully and hold in position while tightening Toggle Bolts. Pull Toggle Bolt toward you and turn clockwise to tighten. See Figure 17.

Toggle Bolt

Toggle Nut

 

Mounting Plate

Figure 15

Space more

than wall thickness

Figure 17

Wall

Figure 16

MOUNTING OVEN TO THE WALL

Two people are recommended to attach the Microwave Oven/ Hood to the Mounting Plate.

1.Thread the power supply cord through the hole made in the bottom of the top cabinet.

2.Install the oven by tilting it forward and sliding it onto two tabs of the Mounting Plate. Rotate the oven up so it rests against the wall. See Figure 18 on page 7.

3.Use the two Top Cabinet Screws and two Flat Washers, supplied in the INSTALLATION HARDWARE, to attach the unit to the top cabinet. See Figure 19 on page 7.

4.Secure the bottom of the oven to the Mounting Plate by using two Tapping Screws 4 x 8 mm from the INSTALLATION HARDWARE. See Figure 19 on page 7.

E

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Wall Construction Before YOU BeginMounting Space Need HELP?Ground Receptacle Opening for Power Cord Hood Exhaust DuctName Quantity Installation HardwarePreparation of the Oven Parts shown not to common scaleVentilation System WireFan Cover Bracket Hood Fan Unit Hood Fan Wire Horizontal Exhaust Outside VentilationFan Cover Bracket Rear CushionOven Installation Mounting PlateMounting Oven to the Wall Checklist for Installation Tabs Top Cabinet Screws Flat Washers Tapping ScrewsPage Construcción DE Pared Antes DE ComenzarEspacio DE Montaje ¿NECESITA AYUDA?Requerimientos Eléctricos Instrucciones DE Conexión a Tierra EléctricaDucto DE Escape DE Campana Extractora NotaElemento Nombre Cantidad Preparación DEL HornoHerrajes DE Instalación Las partes mostradas no están a escalaLengüeta Superior Sistema DE VentilaciónCubierta de la Luz del Horno Filtros de Carbón VegetalSoporte de la Cubierta del Ventilador Gire 180˚Cambie la posición del cable al orificio del lado izquierdo Guarde este Conjunto para Futuras InstruccionesInstalación DEL Horno Placa DE MontajeMontaje DEL Horno EN LA Pared Tornillos Gabinete Superior Tornillo Auto-perforanteNotas Construction DU MUR Avant DE CommencerEspace DE Montage Besoin D’AIDE?Instructions DE Mise À LA Terre Conduit D’ÉVACUATION DE LA HotteLa terre Réceptacle ’ouvrir pour le Cordon de secteur Outils Recommandés Pour L‚INSTALLATION Matériel D’INSTALLATIONPréparation DU Four Filtres à Charbon Système DE VentilationRecirculation D’AIR Fonctionnement Sans Support du Couvercle du VentilateurÉchappement Vertical Ventilation Extérieure Installation DE Four Plaque DE FixationMontage Mural DU Four PENSE-BÊTE Pour L’INSTALLATION Languettes de FixationRemarques

316495060 specifications

The Frigidaire 316495060 is a high-quality oven igniter designed to enhance the performance and reliability of gas stoves and ovens. Engineered for efficiency, this igniter plays a crucial role in igniting the gas flowing into the burner, ensuring a smooth and consistent cooking experience.

One of the main features of the Frigidaire 316495060 is its compatibility with multiple gas appliance models. This versatility makes it an ideal choice for homeowners looking to replace a faulty igniter without needing to invest in an entirely new appliance. Its robust design ensures a perfect fit with compatible models, allowing for an easy installation process.

The igniter’s construction is built to withstand high temperatures, making it durable and long-lasting. This feature is particularly important for individuals who frequently use their gas ovens and stoves, as it can often experience wear and tear over time. The Frigidaire 316495060 has been rigorously tested to ensure it meets the safety and performance standards expected from a trusted brand.

In addition to its durability, this igniter incorporates advanced technology that improves ignition efficiency. The component utilizes a high-heat design that allows for quicker and more reliable gas ignition, reducing the time it takes to preheat the oven or light the burners. This enhancement not only provides convenience but also contributes to energy efficiency, which can lead to lower utility bills over time.

The installation of the Frigidaire 316495060 is straightforward, often requiring minimal tools and expertise. Many users can replace their igniter without professional assistance, making it a cost-effective solution for those experiencing ignition issues.

Overall, the Frigidaire 316495060 stands out for its reliability, efficiency, and ease of installation. Whether you’re a casual home cook or a culinary enthusiast, upgrading to this igniter can significantly improve your cooking experience. With its compatibility across various models and enhanced ignition technology, the Frigidaire 316495060 continues to be a favorite among homeowners seeking an economical and reliable solution for their gas cooking appliances.
Top Page Image Contents