Roksan Audio INTEGRATED CD PLAYER user manual AC Mains Supply, General Cautions

Page 4

 

CAUTIONS

C a s p i a n Integrated CD Player

 

 

 

AC MAINS SUPPLY

Your Caspian CD Player is set to operate from a fixed supply voltage which is marked on a label next to the mains input plug. Before connecting the mains lead please check that your mains supply corresponds to this label as below:

230V Products

………………………………….Voltage Range: 220V – 240V

115V Products

………………………………….Voltage Range: 100V – 120V

The mains lead supplied with this product has an IEC mains socket which plugs into the IEC connector on the unit’s rear panel. The other end is normally attached to the appropriate mains plug for your country. In the UK this is the standard UK13A plug.

This plug should ordinarily not be removed from the lead. If you do remove it, please dispose of it safely so that it cannot be plugged into a mains socket whilst in a potentially dangerous condition. We suggest that you obtain from your dealer a complete replacement lead.

Should you move to another area where either the mains voltage or the mains plugs are different from those as supplied with your CD Player, please contact the appointed ROKSAN distributor for assistance.

Please observe correct mains polarity at all times.

The CD Player mains fuses are located on the rear panel next to the IEC mains connector. They must only be replaced by the fuse of the type and rating as described on the fuse rating label on the rear panel of the unit.

This product requires connection to earth (ground). The earth wire (in the UK this is colour coded green/yellow) of the mains cable supplied with your CD Player must be connected to a suitable earthing point established for this purpose by your electricity supply company. If you are in any doubt, consult a qualified electrician.

If the equipment is likely to be unused for some time, unplug it from the mains supply.

GENERAL CAUTIONS

FCC WARNING

This equipment may generate or use Radio Frequency energy. The user may lose the right to operate this equipment if unauthorised modifications are made.

INTERFERENCE

Properly installed, this unit should not cause harmful interference to radio communications, There is, however, no guarantee that such interference will not occur in a specific installation. If interference arises (which you can determine by switching the unit off and on) you could try to remedy matters by the following:

Re-orient or re-locate the receiving antenna

Increase the distance between the CD Player and receiver

Connect the unit to a different mains circuit from that of the receiver

Consult your ROKSAN appointed dealer or an experienced Radio/TV technician for help and advice

LOCATION

Your Caspian CD Player should be located in a well ventilated area and kept away from sources of heat, dust and humidity and from direct sunlight.

The CD Player may be positioned either as a free standing unit or alongside another audio/video product. Never place the CD Player on carpet or any surface likely to hinder normal ventilation.

Never allow liquids or other objects to fall into the unit.

This unit contains no user serviceable parts. Do Not remove any panels or attempt to service it yourself. Unauthorised servicing will void the warranty.

Roksan Audio ltd

Caspian Integrated CD Player User Manual

CLASSIFICATION: General Use

Version 2.01

All specifications are liable to change without notice. E&OE

Page 4 of 11

ENGLISH

Image 4
Contents S p i a n K S a N a U D I O L I M I T E DSafety Certification Laser Diode PropertiesMaintenance IntroductionUnpacking EU DirectivesGeneral Cautions AC Mains SupplyPlease observe correct mains polarity at all times Installation Roksan Caspian CD Player- Front Panel ViewSetup Connecting Mains PowerSignal Connections OperationPlaying a Disc Mote Control RepeatDisplay Troubleshooting GuaranteeSpecifications Caspian CD PlayerPurchase Date Roksan Retailer