Amphony 1000 manual Push Lift, Installing the headphone batteries

Page 4

User and Installation Guide

￿￿￿￿￿￿ Installing the headphone batteries

R

Two AA (UM-3, R6, Mignon - 1.5 V) batteries are required to operate the headphones. Rechargable batteries with a sufficiently high voltage can be used as well. Choosing batteries with a high capacity (mAh) will extend operating time.

There are two battery compartments, located on both sides, each housing one battery. To access each battery compartment, push on the outer edge of the battery lid. This will release the battery lid. Then lift the middle portion of the battery lid to gain access to the battery compartment.

Insert the battery by pressing the minus pole of the battery against the spring at the bottom of the battery compartment until the plus pole can slide into the battery compartment. The battery should snap into place.

Be sure to only use batteries with a well formed plus pole to ensure proper contact between the plus pole of the battery and the plus pole inside the battery compartment and also to ensure that the battery will not slide out of the battery compartment unintentionally.

Finally, close the battery lid by pushing the middle section. It should snap into the closed position.

To replace the batteries, open the battery lid as described above and pull the battery out of the battery compartment by pushing the battery towards the bottom until the plus pole is released and slides out.

ATTENTION! Never leave batteries inside the headphones for very long periods of time to prevent any damage to the headphones from leaking batteries. Dispose of spent batteries conforming to local waste disposal rules.

Push

1 Lift

2

3

 

 

 

Page 3

Page 3 Page 5
Image 4
Page 3 Page 5
Contents User and Installation Guide User and Installation Guide Connecting the transmitterPlacing the transmitter Installing the headphone batteries Push LiftOperating the headphones Problems and Solutions Table What Is Possible Why What to Do HappeningTechnical Specifications Limited warranty

1000 specifications

The Amphony 1000 is an advanced wireless audio transmitter and receiver system that stands out in the realm of multi-room audio solutions. Designed for audiophiles and casual listeners alike, it delivers high-quality sound across multiple speakers without the hassle of wires. Its main features and technologies make it a strong contender for anyone looking to enhance their audio experience.

One of the key features of the Amphony 1000 is its wireless transmission capability. Utilizing proprietary wireless technology, this system can transmit audio signals over distances of up to 300 feet, making it suitable for larger homes or outdoor areas. The system operates in the 2.4 GHz frequency band, which is known for its balance between range and audio fidelity. This ensures a clear and uninterrupted signal, minimizing dropouts and interference from other devices.

Another notable aspect of the Amphony 1000 is its ease of setup. The plug-and-play design allows users to quickly connect the transmitter to their audio source, such as a smartphone, tablet, or home theater system, and pair it with one or multiple receivers. The intuitive pairing process requires no complicated configurations, making it accessible for everyone, regardless of their technical expertise.

In terms of audio quality, the Amphony 1000 supports a broad range of audio formats and provides robust, high-fidelity sound. The system is engineered to deliver audio with minimal latency, ensuring that sound syncs perfectly with video playback for an optimal viewing experience. This feature is especially important for home theaters where audio-visual synchronization is critical.

Additionally, the Amphony 1000 is designed with flexibility in mind. It allows for the connection of multiple receivers, enabling users to send audio to different rooms or areas simultaneously. Users can easily expand their system as their audio needs grow, making it a future-proof investment.

The system also includes various connection options, such as RCA and stereo inputs, providing compatibility with a wide range of audio devices. This versatility ensures that the Amphony 1000 can be seamlessly integrated into existing audio setups.

Moreover, the Amphony 1000 is built with durability and efficiency in mind, featuring a compact design that does not compromise on performance. With built-in power-saving technologies, it operates efficiently, reducing energy consumption while still delivering exceptional sound quality.

In summary, the Amphony 1000 is a comprehensive wireless audio solution, combining advanced technologies with user-friendly features. Its high-quality audio transmission, easy setup, versatility, and robust sound performance make it an excellent choice for anyone looking to elevate their listening experience at home.
Top Page Image Contents