Dishwasher Features, Getting Started

DISHWASHER FEATURES

Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms against soiled surfaces. Next, the dishwasher fills with water covering the filter area. Water is then pumped through the filter and spray arms. Soil particles go down the drain as the water is pumped out and replaced with clean water. The number of water fills will vary

with the cycle being used.

Upper Spray Arm

Bowl Tines

Middle Spray Arm

Cup Shelf

Adjustable Upper Rack

Tub Gasket

Glass Trap

Overfill Protector

Detergent Dispenser

Vent

Getting Started

1.Load dishwasher (See Preparing and Loading Dishes).

2.Add detergent (See Dishwasher Dispenser & Detergents).

3.Add rinse aid (See Rinse Aid).

4.Select desired CYCLE (See Cycle Chart). The indicator light above the pad will glow when selected.

5.Select desired OPTIONS (See Energy Options). The indicator light above the pad will glow when selected.

Blower Vent

Assembly

Top Rack

*Removable Versa-tray (available only on FPHD2485 Model)

Serial Label (located on right side of tub)

Bottom Rack

Silverware Basket

Orbit CleanTM

Spray Arm

Self-Cleaning Filter

Heating Element

Rinse Aid

Dispenser

6.Run hot water faucet nearest dishwasher until water is hot. Turn water off.

7.To start, press START/CANCEL pad.

8.Close door to latch.

NOTE

The dishwasher is programmed to remember your last cycle so you do not have to reset each time. To start the dishwasher using the same cycle and options selected on the previous wash, just press the START/CANCEL pad.