Frigidaire FGID2466QB, FGID2466QW Status Indicator Lights, Status Window, Console Lights, Overlay

OPERATING INSTRUCTIONS

Status Indicator Lights

The console lights provide information about the cycle selection and current status. During operation, while the door is closed, these lights will remain off and will automatically turn on when the door is opened. At the completion of a cycle, the clean light will come on. The sanitization light will also come on if that option was selected and sanitization was achieved during the wash cycle.

In the unlikely event that the dishwasher malfunctions, displays the error code “Uo”, or gives poor performance you can call the Frigidaire Customer Care Center at 1-800-944-9044. They will be able to provide assistance in troubleshooting the problem and/or locating an authorized service technician, if needed.

Status Window

The STATUS window, available on some models, indicates the following activity:

1H-24H	Number of delay start
	hours. The last hour
	will count down in
	minutes.
CD	Close dishwasher
	door. The status
	indicator lights will
	also flash to indicate
	current cycle status.
MINUTES	Number of minutes
	left in cycle (1-199).
PF	Appears in window
	when dishwasher is
	first connected to Power
	or when power is
	restored following an
	interruption. To clear,
	select START/CANCEL
	or close the door.

Console Lights

If it is desired to have the console remain on while running, perform the following operation: Prior to starting a cycle, press and hold POWER PLUS and RINSE ONLY simultaneously until the corresponding lights begin to flash. This will keep the console lights on during cycle operation. Simply repeat this operation to revert back to the previous setting.

Overlay

6