Sonance 91922 installation instructions Ellipse 1.0 LCR, Technical Assistance and Service

Page 4

Ellipse 1.0 LCR

Speaker Design

In-ceiling LCR infinite baffle

 

 

 

 

Tweeter

1/2" (13mm) Cloth dome, pivoting

Midrange

4" (102 mm) Polypropylene cone, pivoting

Woofer

6-1/2" (165 mm) Black glass composite cone with a

 

rubber surround

 

 

 

 

Frequency Response

50Hz – 20kHz ±3dB

 

 

 

 

Impedance

8 ohms nominal, 6 ohms minimum

Power

5 watts minimum; 125 watts maximum

Sensitivity

89dB 1W / 1m

 

 

 

 

Grille

Aluminum

 

 

 

 

Speaker Dimensions

10-1/2" (267mm) x 15-1/2" (394mm) x 5-7/8" (149mm)

Cutout Dimensions

9" (171mm) x 14" (356mm)

elliptical

Weight

8.0 lbs (3.63 kg) each

 

 

 

 

Ellipse 2.0 LCR

 

 

 

 

 

 

 

 

 

 

Speaker Design

In-ceiling LCR infinite baffle

 

 

 

 

Tweeter

1" (25mm) Aluminum dome, pivoting

Midrange

4" (102 mm) Aluminum cone, pivoting

Woofer

6-1/2" (165 mm) Black aluminum cone with a rubber

 

surround and extended pole piece

Frequency Response

40Hz – 20kHz ±3dB

 

 

 

 

Impedance

6 ohms nominal, 4 ohms minimum

Power

5 watts minimum; 150 watts maximum

Sensitivity

90dB 1W / 1m

 

 

 

 

Grille

Aluminum

 

 

 

 

Speaker Dimensions

10-1/2" (267mm) x 15-1/2" (394mm) x 5-7/8" (149mm)

Cutout Dimensions

9" (171mm) x 14" (356mm)

elliptical

Weight

9.0 lbs (4.1 kg) each

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10 1/2" (267mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15 1/2" (394mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5 7/8" (149mm)

14" (356mm)

9" (229mm)

TECHNICAL ASSISTANCE AND SERVICE

The Technical Assistance Department at Sonance is available at (800) 582-0772 or (949) 492-7777 to answer any questions concerning the operation and installation of your speakers between the hours of 7:00 AM and 5:00 PM Pacific time, Monday through Friday, except holidays.

In the event your unit should need repair or service, you may return the unit to your authorized dealer or use the following guidelines:

1.Be prepared to state the model number and / or serial number, date of purchase and dealer's name and address when calling.

2.Contact Sonance directly at (800) 582-0772 or (949) 492-7777 or at www.sonance.com

3.If you are returning the product directly to Sonance, call us to obtain a return authorization number before shipping. YOU MUST

HAVE PRIOR AUTHORIZATION TO RETURN YOUR UNIT.

4. The original packaging must be used. If the original packaging is unavailable, replacements can be obtained from Sonance for a

small fee.

5.Ship the product via a package delivery service such as UPS or Federal Express. Please do not use the U.S. Postal service.

6.Write the return authorization number on the outside of the box.

7.Ship to:

Attn: Quality Assurance Department

Sonance

212 Avenida Fabricante

San Clemente, CA 92672-7531

8. FREIGHT COLLECT SHIPMENTS WILL BE REFUSED !

Limited Lifetime Warranty

Sonance warrants to the original retail purchaser only that this Sonance product will be free from defects in materials and workmanship, provided the speaker was purchased from a Sonance Authorized Dealer after September 1, 2003. Purchases made before that date carry a limited 5 year warranty.

Defective products must be shipped, together with proof of purchase, prepaid insured to the Sonance Authorized Dealer from whom they were purchased, or to the Sonance factory at the address listed on this installation instruction manual. Freight collect shipments will be refused. It is preferable to ship this product in the original shipping container to lessen the chance of transit damage. In any case, the risk or loss or damage in transit is to be borne by the purchaser. If, upon examination at the Factory or Sonance Authorized Dealer, it is determined that the unit was defective in materials or workmanship at any time during this warranty period, Sonance or the Sonance Authorized Dealer will, at its option, repair or replace this product at no additional charge, except as set forth below. If this model is no longer available and can not be repaired effectively, Sonance, at its sole option may replace the unit with a current model of equal or greater value. In some cases where a new model is substituted, a modification to the mounting surface may be required. If mounting surface modification is required, Sonance assumes no responsibility or liability for such modification. All replaced parts and product become the property of Sonance. Products replaced or repaired under this warranty will be returned to the original retail purchaser, within a reasonable time, freight prepaid.

This Warranty does not include service or parts to repair damage caused by accident, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures, commercial use, voltage inputs in excess of the rated maximum of the unit, or service, repair or modification of the product which has not been authorized or approved by Sonance. This Warranty also excludes normal cosmetic deterioration caused by environmental conditions. This Warranty will be void if the Serial Number on the product has been removed, tampered with or defaced. This Warranty is in lieu of all other expressed warranties. If the product is defective in materials or workmanship as warranted above, the purchaser's sole remedy shall be repair or replacement as provided above. In no event will Sonance be liable for any incidental or consequential damages arising out of the use or inability to use the product, even if Sonance or a Sonance. Authorized Dealer has been advised of the possibility of such damages, or for any claim by any other party.

Some states do not allow the exclusion or limitation of consequential damages, so the above limitation and exclusion may not apply. All implied warranties on the product are limited to the duration of this expressed Warranty. Some states do not allow limitation on the length of an implied warranty. If the original retail purchaser resides in such a state, this limitation does not apply.

w w w . s o n a n c e . c o m

Sonance • 212 Avenida Fabricante • San Clemente, CA 92672-7531, USA • (800) 582-7777 or (949)492-7777 • FAX: (949) 361-5151 • Technical Support: (800) 582-0772

©2007 Sonance. Sonance, Sonic Eye, Flexbar, and Sonafill are trademarks of Dana Innovations.

Image 4
Contents Parts List Optional AccessoriesRecommended Placement IntroductionWire Gauge and Quality Preparing the Installation LocationInstalling the Speakers Adjusting Your SpeakersPainting the Speakers and Grilles StepTechnical Assistance and Service Ellipse 1.0 LCR

91922 specifications

The Sonance 91922 represents a pinnacle of audio engineering, designed for high-performance custom installation in both residential and commercial environments. One of the standout features of the Sonance 91922 is its architectural design, allowing it to blend seamlessly into any space without compromising sound quality. It is part of the Sonance Visual Performance series, which focuses on delivering high-fidelity audio in a minimalistic form.

One of the defining characteristics of the Sonance 91922 is its dual-driver configuration. This setup includes a 6.5-inch polypropylene cone woofer and a 1-inch silk dome tweeter. Together, these components ensure a wide frequency response that ranges from deep, resonant bass notes to crisp, detailed highs, making it suitable for various audio applications, from music playback to home theater systems. The incorporation of advanced materials in the drivers enhances durability and sonic performance, which is essential for long-term use.

The Sonance 91922 also features a unique Infinite Baffle design, which allows it to create a tight, controlled sound field, minimizing distortion while maximizing audio clarity. This helps in providing an immersive listening experience, whether you're enjoying a movie or hosting a gathering with friends. The speaker's enclosed design also aids in improved low-frequency response, allowing for better bass performance without the need for additional subwoofers in smaller setups.

In terms of installation, the Sonance 91922 is equipped with a robust mounting system that simplifies the process for contractors and DIY enthusiasts alike. The speaker is designed for in-ceiling or in-wall applications, and its low-profile design allows it to sit flush with the surface, maintaining the aesthetics of the environment. This versatility ensures that it can be installed in various configurations, accommodating different room layouts and sizes.

Overall, the Sonance 91922 stands out for its commitment to delivering superior sound quality while blending into the architectural fabric of spaces. With its advanced driver technology, Infinite Baffle design, and adaptable installation options, it serves as an excellent choice for those looking to enhance their audio experience without compromising on style or performance. Whether for casual listening or serious home theater applications, the Sonance 91922 is a worthy investment in high-quality audio solutions.