Frigidaire 154768601 Status Indicator Lights, Child Lock Controls, Status Window

OPERATING INSTRUCTIONS

Status Indicator Lights

The SENSING light (some models) comes on at the beginning of the selected cycle and will remain on until the end of the sensing sequence.

The WASHING light (some models) comes on at the beginning of cycle and remains on until the end of the main wash.

The DRYING light (some models) indicates the drying portion of the cycle. The light will come on when either drying option is selected.

When the SANITIZE option is selected, the SANITIZED light will glow when the SANITIZE cycle is finished. If the dishwasher did not properly sanitize the dishes, the light will not come on. This can happen if the cycle is interrupted. The light will remain on until the door is opened.

The RINSING AGENT LOW light (some models) comes on at the end of a cleaning cycle when the rinse agent reservoir is low. The light will remain on through 5 successive cycles or until the reservoir is filled.

The CLEAN light (some models) will come on at end of cycle and remain on until door is opened.

Child Lock Controls

To prevent children from accidently changing the dishwasher cycle or starting the dishwasher, lock the dishwasher controls by pressing and releasing the RINSE ONLY pad (some models) or the NO HEAT DRY pad (some models) for 3 seconds while the door is latched. An indicator light on the lock graphic pad will illuminate when the controls are locked and no new selections can be made until the lock is released. To unlock the controls, press the RINSE ONLY pad or NO HEAT DRY pad until the indicator light goes out.

Status Window

The STATUS window, available on some models, indicates the following activity:

NOTE

The time remaining could suddenly increase or drop several minutes. This means the Smart Sensor has checked the soil level and determined if additional water

fills are needed or if water fills can be deleted.

1H-24H………..	Number of delay start hours. The
	last hour will count down in
	minutes.
CL………………	Close dishwasher door. The status
	indicator lights will also flash to
	indicate current cycle status.
Hd or HO…..…	Indicates a water heat delay.
MINUTES…...…	Number of minutes left in cycle (1-
	99). If cycle is longer than 99
	minutes, a small light will appear in
	the lower right corner and remain
	on until time counts below 99.
PF………………	Appears in window when
	dishwasher is first installed, or
	when power has been interrupted.
	HI-TEMP WASH and NO HEAT DRY
	indicator lights will also flash. To
	clear, touch START/CANCEL pad.
LO	Appears in window when the rinse
	aid dispenser is low and needs to
	be refilled.

8