Product Introduction, For The First Use

	PRODUCT INTRODUCTION
	Bread slot	Carriage handle
		Carriage handle
	Crumb tray	Control panel
	Housing	Control panel
	Housing

CONTROL PANEL

FOR THE FIRST USE

As there is manufacturing residue or oil remained in the toaster or heat element, it usually emits the odour for the first use. It is normal and will not occur after several times use. Before toasting the first slice of bread it is strongly suggested to operate the appliance following below instructions, except without bread.

OPERATION:

1.Put bread slice into the bread slots, it can be inserted two slices at most every time. Ensure that the items for toasting are not too thick or too large

for the toasting slots.

Note: Make sure the crumb tray is completely positioned in place before using.

2.Insert the power cord into the power outlet.

3.Set the desired browning setting by the colour control knob. There is 7-position level, the lowest is white and the highest is dark. The bread slice can be toasted to golden color at the position of “4”.

Note: a) Toasting colour for one slice is darker than that for 2 slices at the same level.

b)If toasted continuously, toasting colour will tend to be darker with continuous use on the same setting.

4.Press carriage handle down vertically until it is positioned in place, the indicator for the Cancel button will be illuminated, and toasting process