Electrolux ZCG 531 manual Installation, Positioning

Page 21

INSTALLATION

Positioning

Remove all the packaging and install the cooker in a dry, ventilated room not near curtains, paper, alcohol, petrol etc (See figure).

The appliance must be set on a heatproof floor. The adjustable feet must not be removed.

L.P.G. cookers or ovens MUST NOT be installed below ground level, i.e. in a basement, or aboard any boat, yacht or other vessel.

This appliance is approved to class “1” regarding overheating of surrounding surfaces.

It is mandatory to keep 20mm distance to the adjacent furniture.

The cooking appliance must be fitted with a stability chain firmly secured to the wall (see fig).

Ventilation

The room containing the cooker should have an air supply in accordance with B.S. 5440: Part 2: Current Editions.

The following requirements for ventilation must be met.

The cooker should not be installed in a bed sitting room with a volume of less than 20m3, if it is installed in a room of volume less 5m3 an air vent of effective area of 110cm2 is required; if it is installed in a room of volume between 5m3 and 10m3, an air vent of effective area 50cm2 is required, while if the volume exceeds 11m3 no air vent is required. However, if the room has a door, which opens directly to the outside, no air vent is required even when the volume is between 5m3 and 11m3.

If there are other fuel burning appliances in the same room, B.S. 5440: Part. 2: Current Editions should be consulted to determine the requisite air vent requirements.

Location

The cooker may be located in a kitchen, a kitchen/diner or bed sitting room but not in a bathroom, shower room or garage.

For information regarding the fitting of flexible supply pipes, the highest temperature at the rear of this cooker which may come into contact with the supply pipe is 70°C above ambient.

mm

610 mm

mm

 

690

690

 

 

150 mm

20mm

20mm

20mm

20mm

Stability hook

Firmly fix chain to rear

of cooker

Stability chain

Chain to be as short

as possible.

21

Image 21
Contents GAS Cooker Page Contents Child Safety Important Safety InformationService During UseHob Control panel Model ZCGUSE of Appliance Using the OvenBefore the First Use of the Cooker UseCooking in the Oven During a power cutIgnition Turning off the oven burnerUsing the Grill Grill burner ignitionGrilling Grilling meat BrowningOven light Or Power Cut Using the HobHob Burners Ignition of the burnersRemovable drawer To replace the drawer follow the same procedure in reverseCookware Condensation and steamMaintenance and Cleaning Oven Bulb Replacement To replace the faulty bulbBurners Something not Working Symptoms Solutions08705 Service and Spare PartsStandard Guarantee Conditions European GuaranteeExclusions Instructions for the Installer Advice for Safety Gas connectionsConnection to gas supply Permanent Connection Electrical connectionsPositioning InstallationLevelling GAS ConnectionsLeft Hand Connection from front Right Hand Connection from frontPage Gas Type Pressure Table no.1 Cat II 2H3+ BurnerCons Mbar Natural Gas 267Adjustment of minimum level for the hob Burners Replace the nozzles of the hob burnersHob burners Replace the nozzles of the oven burners Adjustment of minimum levelOven burner Grill burnerPage ZCG 531 Electrolux plc

ZCG 531 specifications

The Electrolux ZCG 531 is a powerful and efficient vacuum cleaner designed for modern homes that demand cleanliness and convenience. This versatile vacuum is equipped with advanced technologies that streamline the cleaning process, making it easier for users to maintain a dust-free environment.

One of the standout features of the ZCG 531 is its powerful suction capability, thanks to a high-performance motor that delivers robust performance. This vacuum can effortlessly pick up debris from various surfaces, whether carpets, hardwood floors, or tiles, ensuring that no dirt is left behind. Users will appreciate the adjustable suction settings, allowing them to tailor the vacuum's power to different cleaning tasks.

The design of the ZCG 531 focuses on user comfort and convenience. It is lightweight and easily maneuverable, allowing users to clean different areas of their home without strain. Its ergonomic handle ensures a comfortable grip, making it ideal for extended cleaning sessions.

Additionally, the ZCG 531 features a multi-stage filtration system designed to trap allergens and dust particles effectively. The HEPA filter captures even the tiniest particles, contributing to improved indoor air quality. This makes it an excellent choice for allergy sufferers or households with pets, as it minimizes the spread of allergens in the environment.

One of the unique technologies incorporated in the Electrolux ZCG 531 is its brush roll design. The vacuum includes a tangle-free technology that prevents hair and fibers from wrapping around the brush roll, reducing maintenance effort and ensuring consistent cleaning performance. This feature is particularly useful for homes with pets, where hair can often clog other vacuum systems.

Moreover, the ZCG 531 comes with several attachments, including a crevice tool for tight spaces and a dusting brush for delicate surfaces. These tools enhance the vacuum’s versatility, allowing users to tackle various cleaning tasks with ease. The vacuum’s generous cord length adds to its usability, providing extended reach without constantly changing power outlets.

In summary, the Electrolux ZCG 531 is a feature-packed vacuum cleaner that combines powerful suction with modern technologies. Its multi-stage filtration system, tangle-free brush roll, and array of accessories make it an ideal solution for all cleaning needs. Whether tackling pet hair, allergens, or everyday dirt, the ZCG 531 is designed to deliver exceptional results, making home cleaning more efficient and enjoyable.