Electrolux EOD5310 manual Installation Instructions, Things YOU Need to Know, Getting Things Ready

Page 7

INSTALLATION INSTRUCTIONS

THINGS YOU NEED TO KNOW

WARNINGS:

￿This appliance must be installed by a qualified electrician/competent person. Safety may be impaired if installation is not carried out in accordance with these instructions.

￿This appliance must be earthed.

￿Do not remove the screws from the earth tab extending from the oven mains terminal block (Fig. 6).

￿Before connecting the appliance make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This is situated on the front frame of the appliance and can be seen upon opening the door. Alternatively the rating plate may also be found on the back or top of some models (where applicable).

￿Do not alter the electrical circuitry of this appliance.

THINGS TO NOTE

￿This appliance is designed to be fitted in cabinets of the recommended dimensions as shown (Fig.2).

￿If your cabinet interior dimension is between 565- 570mm the oven may still be fitted. However, a minor modification to the cabinet will be required to reduce the aperture size down to 560-565 mm, to allow the product to be securely screwed into the cabinet.

￿The dimensions given provide adequate air circulation around the unit within the cabinet, ensuring compliance with BS EN60-335.

￿Enquiries regarding the installation of the cooker point, if required, should be made to your Regional Electricity Company to ensure compliance with their regulations.

￿The appliance socket switch should be outside the cabinet but within 2m of the appliance to make it accessible to switch off the appliance in case of an emergency.

￿To protect the hands, wear gloves when lifting the oven into its housing.

NOTE: HOUSE CIRCUIT

Earth leakage and continuity tests must be carried out before the appliance is connected to the mains supply and re-checked after fitting.

GETTING THINGS READY

CHOICE OF ELECTRICAL CONNECTION

￿There are three possible ways to connect your appliance. In each case the appliance should be operated using at least 6mm2 twin core and earth PVC insulated multicore cable. Please choose from the most appropriate after reading the different methods:-

a)By connecting to a cooker point (having a double pole isolating switch with at least 3mm contact separation in all poles and neutral) and protected with a fuse or miniature circuit breaker at your mains fuse box.

Subject to Regional Electricity Companies regulations if you wish to connect the oven and hob to the power supply you may use one of the following two methods:-

b)By connecting the appliance together with a hob directly to a cooker point(s). Having a double pole isolating switch with at least 3mm contact separation in all poles and neutral.

c)If you wish to connect an oven and a hob to a cooker point you can by connecting the oven and hob separately to the cooker point. Oven and hob units should be separately connected to a cooker point. See Fig. 1.

Fig. 1

NOTE: It is good practice to :

￿Fit an Earth Leakage Circuit Breaker to your house wiring.

￿Wire your appliance to the latest IEE regulations.

PREPARING CABINET FOR FITTING OF OVEN

￿Make sure that the cabinet is the correct size for the appliance to be fitted (Ref. Fig. 2).

￿If the size is between 565-570mm, then the cabinet should be modified so that at the screw fixing points the recommended dimension of at least 560-565mm is maintained. The modification should ideally be localised to ensure that after screw fitment the oven is securely fixed into position.

￿The cabinet must be stable and level by firmly securing it to the wall or floor. If necessary, make arrangements to ensure the shelf upon which the oven will rest is level.

￿When the appliance is installed ensure a minimum gap of 2mm is maintained between the trim on the bottom edge of the appliance, and any corresponding door / panel underneath.

7

Image 7
Contents Model EOD5310 Technical Details Model NO. EOD Contents Uses of the Main Oven Selecting the Main Oven During Operation SafetyGeneral After USEThings YOU Need to Know Installation InstructionsGetting Things Ready Built In Installation Recommended Cabinet Dimensions in MillimetresPreparing Cable HOW to Finish UnpackingTools Required Making the Electrical ConnectionsConnecting to a HOB or Cooker Point Connecting to Mains TerminalFitting Into the Cabinet Getting to Know Your Oven IntroductionBCD About Condensation and Steam General Notes on Using the OvenControl Panel Indicator Neon Rating PlateGrill and Oven Furniture Helpful Hints When Buying and Preparing FoodThings to Note Dual GrillUses of the Dual Grill Selecting the Dual GrillFood Shelf Grill Time Grilling ChartMeat Temperatures Hints and TipsTo FIT the Oven Shelves Main OvenUses of the Main Oven Selecting the Main OvenHints and Tips FAN Oven Food Shelf Cooking Temp C Approx Position Oven Cooking ChartMeat FAN Oven Cooking Time Roasting ChartRoasting Chart Internal TemperaturesUses of Defrost Feature Defrost FeatureSelecting Defrost Cleaning Inside the Oven and Grill Compartment Care and CleaningCleaning the Outside of the Appliance Cleaning the Control Knobs and HandlesTo Replace the Outer Glass Cleaning Between the Outer and Inner Door GlassTo Clean the Inner Glass Door Panels To Remove the Outer GlassReplacing the Oven Light Bulb Grill and oven do not work Something not WORKING?SL1 1DZ Service and Spare PartsStandard Guarantee Conditions Guarantee ConditionsImportant Notice

EOD5310 specifications

The Electrolux EOD5310 is a versatile built-in oven that seamlessly combines modern technology with user-friendly design, making it a must-have for any kitchen enthusiast. This oven is designed to cater to a wide range of culinary needs, offering precise cooking options and a sleek aesthetic that fits perfectly in any modern kitchen.

One of the standout features of the EOD5310 is its multifunctionality. It comes equipped with multiple cooking modes, including conventional cooking, fan cooking, and grill options. This flexibility allows users to prepare a variety of dishes, from baked goods to roasted meats, with ease. The fan-assisted cooking feature ensures even heat distribution throughout the oven, resulting in perfectly cooked meals every time.

The oven boasts an impressive capacity, providing ample space for cooking multiple dishes simultaneously. With a large interior, users can easily accommodate even sizeable family meals or gatherings. The adjustable shelving system offers flexibility in arranging the racks, allowing for taller items while maximizing the usable space.

Equipped with advanced heating technologies, the EOD5310 ensures rapid heating and maintains consistent temperatures throughout the cooking process. Its powerful heating elements enable quick preheating, so users can start cooking without unnecessary delays. Additionally, the oven features a self-cleaning function that uses high-temperature pyrolysis to break down grease and food residue, simplifying the cleaning process significantly.

The intuitive digital display and control panel enhance the overall user experience, providing easy navigation through the various cooking modes and settings. Users can effortlessly set timers, adjust temperatures, and monitor cooking progress. The EOD5310 also includes safety features such as a child lock and cool-touch door, ensuring peace of mind when cooking around children or pets.

Another noteworthy aspect of the Electrolux EOD5310 is its energy efficiency. It is designed to consume less energy compared to conventional ovens, making it a more environmentally friendly choice. This not only benefits the planet but also helps users save on energy bills.

In summary, the Electrolux EOD5310 is a sophisticated built-in oven that combines functionality, safety, and efficiency. Its range of features and modern technologies cater to the needs of both novice and experienced cooks, making it a perfect addition to any kitchen. With its stylish design and ease of use, the EOD5310 stands out as a top choice for those looking to elevate their cooking experience.