Roksan Audio 5-CH AMPLIFIER user manual Setup, Connecting Mains Power, Signal Connections

1. Channel 1 Input

1a. Channel 1 Chain Signal Output

1b. Channel 1 Loudspeaker Output

2. Channel 2 Input

2a. Channel 2 Chain Signal Output

2b. Channel 2 Loudspeaker Output

3. Channel 3 Input

3a. Channel 3 Chain Signal Output

3b. Channel 3 Loudspeaker Output

4. Channel 4 Input

4a. Channel 4 Chain Signal Output

4b. Channel 4 Loudspeaker Output

5. Channel 5 Input

5a. Channel 5 Chain Signal Output

5b. Channel 5 Loudspeaker Output

6.Mains Power Switch

7.Mains Power Fuse Holder

8.Mains Power Connector

SETUP C a s p i a n 5-Ch Amplifier

CONNECTING MAINS POWER

Please refer to rear panel view on Page 4. The moulded IEC connector of the supplied mains lead should be plugged into the socket 8 on the rear of the unit first and then plugged into the mains supply. The Mains power switch 6 is on the rear panel of the 5-Channel Power Amplifier. This switch is normally left on. If the unit is likely to be unattended for a long period, switch it off and unplug the mains lead from the wall.

SIGNAL CONNECTIONS

Signal Inputs: There are 5 Analogue Inputs with Gold plated RCA Phono Sockets and connections are made as follows:

Front Left Channel Input	1	(FL)	White	Connect to Front Left Channel output of Surround Sound Processor
Front Right Channel Input	2	(FR) Red		Connect to Front Right Channel output of Surround Sound Processor
Centre Channel Input	3	(C)	Green	Connect to Centre Channel output of Surround Sound Processor
Surround Left Channel Input	4	(SL) Blue		Connect to Surround Left Channel output of Surround Sound Processor
Surround Right Channel Input	5	(SR) Blue		Connect to Surround Right Channel output of Surround Sound Processor

Signal Outputs: There are 5 Analogue Chain Outputs with Gold plated RCA Phono Sockets and connections are made as follows:

Front Left Channel Chain Output	1a	(FL) White
Front Right Channel Chain Output	2a	(FR) Red
Centre Channel Chain Output	3a	(C) Green
Surround Left Channel Chain Output	4a	(SL) Blue
Surround Right Channel Chain Output	5a	(SR) Blue

These outputs are used for Multi-Amping the Loudspeakers. Connect the ‘Chain’ Output to another Input of the

5-Channel Power Amplifier* or an Input of another 5-Channel Power Amplifier for Bi-Amping (or Tri-Amping etc.) of your Loudspeakers for improved performance.

* when the Main or the Centre or the Surround speakers are driven from another amplifier.

IMPORTANT NOTE: For optimum performance it is recommended to use high quality inter-connect cables such as ROKSAN HDC-02A high definition analogue Cable.

Roksan Audio ltd	Caspian 5-Channel A/V Power Amplifier User Manual
CLASSIFICATION: General Use	Version 2.01

All specifications are liable to change without notice. E&OE Page 5 of 9 ENGLISH