Electrolux 68001KF-N operating instructions What to do if …, Possible cause Remedy

What to do if …

Problem

The cooking zones will not switch on or are not func- tioning

Possible cause	Remedy
More than 10 seconds have	Switch the appliance on
passed since the appliance	again.
was switched on
The lock is switched on l	Switch off the lock (See
	the section “Locking/un-
	locking the control panel”)
The child safety device is	Deactivate the child safety
switched on l	device (See the section
	“Child safety device”)
Several sensor fields were	Only touch one sensor field
touched at the same time
The sensor fields are partly	Remove the cloth or the
covered by a damp cloth or	liquid.
with liquid	Switch the appliance on
	again.
Safety cut-out has been	Switch the appliance on
triggered	again
STOP+GO is activated	Switching off STOP+GO

The residual heat indicator	The cooking zone was only	If the cooking zone is sup-
is not displaying anything	on for a short time and is	posed to be hot, call your
	therefore not hot	local Service Force Centre.

The automatic warm up function is not switching itself on

There is still residual heat	Let the cooking zone cool
on the cooking zone h	down
The highest heat setting is	The highest heat setting
set Ç	has the same power as the
	automatic warm up func-
	tion
The heat setting was set	1. Switching off the cook-
using the sensor field	ing zone
	2. Set the cooking zone us-
	ing the sensor field

Repeated acoustic signal	One or more sensor fields	Uncover sensor field
(6x), appliance switches off	have been covered for
	longer than 10 seconds
Display is switching be-	Power management is re-	See the section “Switching
tween two heat settings	ducing the power of this	the power function on and
	cooking zone	off”

22