Frigidaire 318201724 manual Three Conductor Wire Connection to Range

Page 3

30" ELECTRIC RANGE INSTALLATION INSTRUCTIONS

Three Conductor Wire Connection to Range

If local codes permit connection of the frame grounding conductor to the neutral wire of the copper power supply cord (see Figure 3):

1.Remove the screws from the access plate at the lower right end of the rear cover to expose range terminal connection block.

2.Using the nuts supplied in the literature package, connect the neutral of the copper power supply cord to the center silver-colored terminal of the terminal block, and connect the other wires to the outer terminals. Match wires and terminals by color (red wires connected to the right terminal, black wires connected to the left terminal) (see figure 3).

3.Replace the terminal cover and replace the screws.

Silver Colored Terminal

Red Wire

Terminal

Cord

Block

Mounting

 

 

Plate

Black

Neutral

Wire

(White Wire)

 

Grounding

 

Strap

A User Supplied

 

1 1/8" (2.9 cm) Dia.

 

Direct Connection

Strain-relief Must

 

To 240 V

Hole. Punch Out

Be Installed at This

Knockout for 1 3/8"

Location.

Receptacle

(3.5 cm) Dia. Cord

 

 

 

Figure 3

Kit Hole.

 

 

Four Conductor Wire Connection to Range

Where local codes does NOT permit connection of the frame grounding conductor to the neutral wire of the copper power supply cord (see Figure 4):

1.Remove the screws from the access plate at the lower right end of the rear cover to expose range terminal connection block.

2.Remove the grounding strap from the terminal block and from the appliance frame.

3.Using the nuts supplied with the literature package, connect the ground wire (green) of the copper power supply cord to the frame of the appliance with the ground screw, using the hole in the frame where the ground strap was removed (see Figure 4).

4.Connect the neutral of the copper power supply cord to the center silver-colored terminal of the terminal block, and connect the other wires to the outer terminals. Match wires and terminals by color (red wires connected to the right terminal, black wires connected to the left terminal).

5.Replace the terminal cover and replace the screws.

Terminal Block

Silver Colored Terminal

Red

Wire

Black Wire

 

1 1/8" (2.9cm)

 

Dia. Direct

 

Connection

 

Hole. Punch

Neutral

Out Knockout

(White Wire)

for 1 3/8"

Ground (Bare

(3.5cm) Dia.

Cord Kit Hole.

Copper Wire)

A User Supplied

 

Strain-relief Must

 

Be Installed at This

 

Location

To 240 V Receptacle

NOTE: Be sure to remove the supplied grounding strap.

Figure 4

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Clearances and Dimensions Important Notes to the InstallerImportant Note to the Consumer Electrical Connection Requirements Models Requiring Power Supply Cord KitThree Conductor Wire Connection to Range Wire Electrical System Example Junction Box Leveling the Range Anti-Tip Bracket Installation InstructionsBefore You Call for Service Important Safety WarningPage Espacios y dimensiones Notas importantes para el instaladorNota importante al consumidor Instale los soportes antivuelco. Ver Placa de IdentificaciónRequisitos de conexión eléctrica Conexión del cable a tres alambres la cocina Desconecte el suministro eléctrico Advertencia Importante Para Seguridad Cómo nivelar la estufaInstrucciones para la Instalación del Soporte Antivuelco Antes de llamar al servicio

318201724 specifications

The Frigidaire 318201724 is a high-quality, versatile oven igniter designed to enhance the functionality of your kitchen. This essential component is engineered specifically for gas ovens, ensuring reliable ignition and efficient cooking performance. With a focus on user convenience and safety, the Frigidaire 318201724 stands out as a dependable choice for homeowners and cooking enthusiasts alike.

One of the main features of the Frigidaire 318201724 is its durable construction. Made from high-quality materials, this igniter is built to withstand the rigors of frequent use, offering longevity and dependability. Its design is tailored for compatibility with various Frigidaire models, making it an ideal replacement part for many existing gas ovens. Installation is straightforward, often requiring no special tools or expertise, allowing users to replace it with minimal effort.

In terms of technology, the Frigidaire 318201724 employs advanced heating elements that ensure quick and efficient ignition. This not only speeds up the cooking process but also enhances energy efficiency, allowing users to save on utility bills. The igniter reaches the proper temperature swiftly, reducing the risk of uneven heating and ensuring that food cooks evenly, which is crucial for achieving optimal flavors and textures.

Another characteristic that sets the Frigidaire 318201724 apart is its safety features. The igniter is designed to provide a stable flame, which minimizes the risk of gas leaks and enhances overall cooking safety. Additionally, its robust construction helps to prevent overheating, thus ensuring a safe cooking environment for users.

Furthermore, the Frigidaire 318201724 is versatile, as it can be used in a variety of cooking applications, from baking to broiling. This makes it a valuable addition to any kitchen, whether you are preparing a simple weeknight meal or an elaborate feast.

In conclusion, the Frigidaire 318201724 oven igniter is an essential kitchen component that boasts durable construction, advanced ignition technology, and safety features. Its compatibility with numerous Frigidaire models and easy installation process make it a practical choice for anyone looking to enhance their cooking experience. Whether you're a casual cook or a culinary enthusiast, the Frigidaire 318201724 ensures efficient and safe cooking, contributing to delicious results every time.
Top Page Image Contents