When the self-clean cycle has completed

Setting a self-clean cycle or a delayed start self-clean cycle

Examples: To start an immediate self-cleaning cycle and/or how to add a delay start time of 9:00 o’clock and shut-off self-clean automatically:

Step

Press

1.Be sure the control is set with the correct time of day, ALL the oven racks are removed and the oven door is closed.

Go to step 5 if you wish to start the self-clean immediately.

Finish steps 2 thru 6 if setting a delay start self-clean.

2.Press delay start.

3.Enter 9 0 0.

4.Press start.

5.Press self clean once for a 3-hour

clean time, press self clean twice for 4-hour clean and press 3 times

for a 2-hour self-clean cycle time.

6.Press start.

IMPORTANT

As soon as the controls are set, the motor driven door lock will begin to close automatically. “door Loc” will appear in the display (See Fig. 1). DO NOT open the oven door while “door Loc” is on (allow 15 seconds for the oven door to completely lock).

Once the door has locked “CLn” will appear in the display indicating the oven will begin the self-clean process (Fig. 2).


	Fig. 1		Fig. 2

SELF-CLEANING

When the self-clean cycle has completed:

1.The time of day and “Hot” will appear in the display window (See Fig.3).

2.Once the oven has cooled down for about 1 hour and “Hot” is no longer displayed the “door OPn” message should appear (Fig. 4). When this message turns off the oven door may be opened. Use caution and avoid possible burns when opening the door after the self- cleaning cycle has completed. The oven may still be

VERYHOT.

Fig. 3

Fig. 4

If it becomes necessary to stop a self-clean cycle once it has been activated:

1.Press cancel.

2.If the self-clean cycle has heated the oven to a high temperature, allow enough time for the oven to cool and for the “door OPn” message to appear (Fig. 4). When this message turns off the oven door may be opened.

3.Restart the self-clean cycle once all conditions have been corrected.

CAUTION

To avoid possible burns use care when opening the oven door after the self-cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape.

DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and avoid possible burns when opening the door after the self-cleaning cycle has completed. The oven may still be

VERYHOT.

NOTES

Whenever the self-clean feature is active you may check the amount of time remaining in the self-clean cycle by

pressing the pad once. The oven door will be

locked until the range has cooled sufficiently. You will need to allow about 1 additional hour to the time displayed before you can open the oven door.

When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel.