Frigidaire 316000653 Before Setting Oven Controls, Arranging Oven Racks

Before Setting Oven Controls

Arranging Oven Racks

(Some models may have one rack.) ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO OPERATING THE OVEN). Always use oven mitts when using the oven.

Oven Vent Location

The oven vent is located below the backguard. When the oven is on, warm air is released through the vents. This venting is necessary for proper air circulation in the oven and good baking results.

REMOVING & REPLACING OVEN

RACKS

To remove, pull the rack forward until it stops. Lift up front of rack and slide out. To replace, fit the rack onto the guides on the oven walls. Tilt the front of the rack upward and slide the rack back into place.

ARRANGING OVEN RACKS WITH 5

RACK POSITIONS

To bake on 1 rack, place the rack on position 3 or 4. To bake on 2 racks, place the racks on positions 2 and 4.

Setting Oven Controls

Figure 1

Note: The oven control has a built-in safety feature that will shut off the oven if the control is left on for more than 11 hours 59 minutes.

Figure 2

To Set or Change the Temperature for Normal Baking

The oven can be programmed to bake at any temperature from 170°F to 550°F (65°C to 287°C).

To Set the Controls for Normal Baking:

1.Turn Temperature Control Knob to the desired baking temperature.

2.Push . If is not pushed, the control will beep as a reminder.

3.The oven will begin heating to the selected temperature. When the temperature reaches the desired baking temperature, the control will beep 3 times.

4.To cancel the baking function, turn Temperature Control Knob to OFF.

To Change the Oven Temperature after Baking has Started: Turn Temperature Control Knob to the new, desired temperature.

If the Power is Interrupted During a Bake Cycle:

Figure 1—Press to resume cooking.

Figure 2—Set clock to time of day, then press . 9