Sherwood RX-5502 manual Operations, Listening to a Program Source, Before operation

Page 12

RX-5502(A)2007.5.179:15AM페이지11

Operations

LISTENING TO A PROGRAM SOURCE

Before operation

∙Push the POWER switch.

• This unit enters the standby mode and the STANDBY indicator lights up.

This means that the receiver is not disconnected from the AC mains and a small amount of current is retained to support the operation readiness.

• To switch the power off, push the POWER switch again. Then the power is cut off and the STANDBY indicator turns off.

1. In the standby mode, turn the power on.

• Each time the ON/STANDBY button on the front panel, the receiver is turned on to enter the operating mode or off to enter the standby mode.

• On the remote control, press the POWER ON button to enter the operating mode or press the STANDBY button to enter the standby mode.

2. Switch the desired speakers on.

• You can select the various combinations of speakers depending on where the speakers C or/ and D are installed.

• Each time the SPEAKER A/B SELECTOR button is pressed, the speakers are switched on or off as follows :

� A/B ~ � - / - ~ � A/ - ~ � - /B ~

or (MAIN A/B) or (MAIN -/-) or (MAIN A/-) or (MAIN -/B)

( ) : When the ROOM2 mode is set to on.

• Each time the SPEAKER C/D SELECTOR button is pressed, the speakers are switched on or off as

 

follows :

 

 

 

 

 

� ~ C/D �

~ - / -

� ~ C/ -

� ~ - /D

 

 

 

 

or (R2 C/D)

or (R2 -/-)

or (R2 C/-)

or (R2 -/D)

( ) : When the ROOM2 mode is set to on.

• When using the headphones for private listening, switch off all the speakers installed in the main room.

�Note :

• To use ROOM2 function, you should install speakers C or/and D in another room (ROOM2) and set the ROOM2 mode to on. (For details, refer to "CONNECTING SPEAKERS" on page 7 and "ROOM2 PLAYBACK" on page 19.)

11

Page 11 Page 13
Image 12
Page 11 Page 13
Contents RX-5502A2007.5.17915AM페이지1 RX-5502A2007.5.17915AM페이지1 Safety Instructions Introduction Read this Before Operating Your UnitContents Connecting ANTENNAs System ConnectionsConnecting Phono AC Input Cord Front Panel & Remote Controls Front Panel Remote Controls Fluorescent DisplayPress the button to select the desired input source Remote Control Operation Range Loading Batteries Remove the coverLoad two batteries matching the polarity Standby mode, turn the power on Switch the desired speakers onOperations Listening to a Program SourceSelect the desired input source To listen with the headphones Adjusting the tone bass and trebleEnter the tone mode At the desired tone mode, adjust the tone as desiredAdjusting the sound volume balance Enter the balance modeAuto tuning Select the tuning modeListening to Radio Broadcasts Select the tuner and then the desired bandManual tuning Auto presetting Manual presettingTuning to preset stations Select the desired preset numberRepeat the above steps 1 to 3 to memorize other stations Operating the sleep timer Adjusting the brightness of the fluorescent displayRecording Other FunctionsEnter the ROOM2 mode Turn on the ROOM2 modeROOM2 Playback Select the desired ROOM2 speakersSelect the desired ROOM2 input Troubleshooting Guide Problem Possible Cause RemedySpecifications Amplifier Section
Related manuals
Manual 25 pages 14.58 Kb

RX-5502 specifications

The Sherwood RX-5502 is an exceptional audio receiver designed to deliver a pristine sound experience in home entertainment systems. Renowned for its robust performance and rich feature set, the RX-5502 is ideal for audiophiles and casual listeners alike, providing a perfect blend of power and versatility.

At the heart of the RX-5502 is its impressive amplifier section, which boasts a power rating of 100 watts per channel. This ensures ample volume levels and dynamic range to fill any listening environment. The receiver is equipped with a high-quality digital signal processor (DSP), which enhances audio playback by applying various sound enhancements and equalization settings. This allows users to tailor their listening experience to their preferences, whether they are enjoying music, watching movies, or gaming.

One of the standout features of the RX-5502 is its support for various audio formats, including surround sound formats like Dolby Digital and DTS. This enables immersive audio experiences that transport listeners into the heart of the action, making it an ideal choice for movie lovers and gamers alike. Additionally, the receiver includes a built-in AM/FM tuner, offering access to numerous radio stations and the ability to save favorite presets.

Connectivity options are plentiful on the RX-5502, with multiple HDMI inputs for a seamless integration with modern devices. The receiver supports 4K pass-through, ensuring compatibility with the latest high-definition video standards. Furthermore, it boasts a range of audio input options, including optical and coaxial connections, as well as traditional analog inputs, accommodating various sources such as CD players, turntables, and streaming devices.

The RX-5502 also features a convenient and user-friendly interface, with an on-screen display that simplifies navigation through settings and options. The included remote control allows for easy operation from the comfort of the couch, making it simple to adjust volume levels, switch sources, and manage playback.

In conclusion, the Sherwood RX-5502 stands out as a powerful and versatile audio receiver. With its robust build quality, impressive audio performance, extensive connectivity options, and user-friendly design, it is a worthy addition to any home theater or music system. Whether for a casual listening session or an epic movie night, the RX-5502 ensures an engaging audio experience that captivates and entertains.
Top Page Image Contents