Danby DR2009WGLP Installation Instructions, Leveling a Free Standing Range, GAS Connections

Page 6

INSTALLATION INSTRUCTIONS

Be sure the appliance is properly installed and grounded by a qualified technician. It is the responsibility of the technician to be certain that your range is properly installed. Situations caused by improper installation are not covered under the warranty. Any expenses incurred due to such situations will not be paid by the manufacturer of the appliance.

WARNING: To reduce the risk of tipping the appliance by abnormal usage or improper door loading, the appliance must be secured by properly installing the anti-tip device packed with the appliance. To check if the device is installed and engaged properly, carefully tip the range forward. The anti-tip device should engage and prevent the range from tipping over.

If this range is removed for any reason, service or cleaning etc,. it must be replaced as outlined in the installation instructions, before placing the range back in operation.

LEVELING A FREE

STANDING RANGE

All free-standing ranges must be level to obtain proper cooking results. The leveling legs should be screwed into the corner brackets. Place a level, or a pan or measuring cup partially filled with water, level on oven rack. Adjust leveling legs until the range is level. The top of the side panels should be level with countertop or work surface.

IMPORTANT: Be sure to keep the leg levelers. Leveling of the range is very important.

GAS CONNECTIONS

Have the dealer where you purchased your new range install or recommend a qualified installer. Installation must conform with local codes. The range should be connected to a supply line with 1/2-inch black iron pipe or a certified flexible type stove connector. To prevent gas leaks, put an approved sealing compound, which is resistant to liquefied gases, on all threaded connections.

IMPORTANT: Do not apply pressure directly to the range manifold pipe when tightening supply connections. The manifold pipe should be held securely at the pressure regulator to prevent twisting. Hold the pressure regulator with a wrench during the tightening of the connection, or the manifold pipe may be twisted and split, causing a dangerous leak.

Note: The installation of ranges designed for manufactured (mobile) homes must conform to specific standards and local codes.Check all piping connections in the unit for leaks. Never use an open flame to check for gas leaks. It is possible for connections made at the factory to leak due to vibrations encountered in transportation. Have any suspected leaks repaired before use by a qualified service personnel.

ELECTRICAL

Your range is grounded with a three-conductor (three-prong plug) supply cord which

CONNECTIONS

will ground the range when plugged into a similar grounded wall receptacle.

 

 

If the backgaurd of the range has a clock or light, connect the cord from the backgaurd into the special terminal block located at the top of the main back directly under the backgaurd supply cord.The appliance must be electrically grounded when installed in accordance with local codes.

5

Image 6
Contents DR2009WGLP Welcome Please do this NOWResulting in property damage, personal injury, or death What to do if YOU Smell GAS Important Safety InformationProper Installation Before First USEImportant Safety Information cont’d Important SafegaurdsEnergy Saving Tips Surface CookingOven Cooking GAS Connections Installation InstructionsLeveling a Free Standing Range ElectricalUsing Your Range Operating InstructionsFlame Size Type of Cooking Using Your Operating Instructions cont’dNO. of Pans Position on Rack Broiler Pan Care and CleaningControl Panel and Knobs To Remove/Replace the Storage DrawerCleaning the Outer Door Care and Cleaning cont’dCleaning the Inner Door Oven CavityTroubleshooting Problem Possible Cause SolutionLimited Warranty GAS Range Bienvenida Sírvase Realizar LO Siguiente AhoraQUÉ Hacer SI Huele a GAS InstallaciónInformacion Importantes DE Seguridad Antes DE Utiliza PrimeroInformacion Importantes DE Seguridad cont’d Medidas DE Protección ImportantesConsejos Paraahorrar Energía Cocción en las hornillasCocción en el horno Conexiones DE GAS Instrucciones DE InstalaciónCómo Nivelar UNA Cocina Independiente ConexionesInstrucciones Operadoras Cómo Usar LA CocinaPosición EN LA Bandeja Instrucciones Operadoras cont’dCómo Usar LA Centro del bandejaCuidados Y Limpieza Cuidados Y Limpieza cont’d Problema Posible Causa Solución Antes DE Llamar AL Servicio TécnicoCocinas DE GAS Garantía Limitada Bienvenue Installation Appropriée Consignes DE Sécurité ImportantesAvant Première Utilisation Consignes DE Sécurité Importantes suite DE SécuritéSuggestions Économiser Dénergie Cuisson au dessus de la cuisinièreCuisson au four Instructions Dinstallation Mise À Niveau D’UNE Cuisinière AutostableRaccords DE GAZ Consignes D’UTILISATION Utiilisation DE Votre CuisinièreConsignes D’UTILISATION suite Utiilisation DE VotreNO. DE Disposer SUR Grille Casseroles Soins ET Entretien Porte de four de décollage Soins ET Entretien suiteCavité de four Nettoyage de la porte intérieureDépannage Les brûleurs du dessus deGarantie Limitée DE Cuisinière À GAZ GAS Range Cuisinière DE GAZCocina DE GAS
Related manuals
Manual 35 pages 6.38 Kb

DR2009WGLP specifications

The Danby DR2009WGLP is a versatile and efficient refrigerator designed to meet the storage needs of varying environments, from small apartments and offices to recreational spaces like cabins and RVs. This compact refrigerator combines functionality with modern convenience, making it an excellent choice for those seeking reliable refrigeration solutions without requiring a large footprint.

One of the prominent features of the Danby DR2009WGLP is its generous 2.0 cubic feet capacity, providing ample space for your food and beverage essentials. The adjustable shelves allow users to customize the internal layout according to their storage preferences. With a reversible door, this refrigerator offers flexible installation options, allowing it to fit seamlessly into any space.

Energy efficiency is another significant aspect of the Danby DR2009WGLP, as it is ENERGY STAR certified. This certification signifies that the appliance meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. As a result, users can save on electricity bills while minimizing their environmental impact.

In terms of technology, the DR2009WGLP features an intelligent mechanical thermostat, which ensures precise temperature control within the refrigerator. This ensures that food stays fresh, while also accommodating different items that require specific coolness levels. The unit operates quietly thanks to its compressor cooling system, making it suitable for noise-sensitive environments.

The exterior of the Danby DR2009WGLP is designed with both style and practicality in mind. Its sleek white finish gives it a clean and classic appearance that can easily blend with various decor styles. The interior is well-lit, making it easy to find items, even in low-light conditions.

The compact design does not compromise on usability; the DR2009WGLP features an integrated door shelf for convenient storage of smaller items and a can dispenser that keeps beverages organized and easily accessible. Additionally, the unit has a built-in ice cube tray, making it perfect for those who enjoy chilled drinks.

Overall, the Danby DR2009WGLP stands out for its thoughtful features, energy efficiency, and modern design. Whether you need a reliable refrigerator for a small living space or seek additional cooling in a larger area, this model offers a perfect blend of style, size, and functionality, ensuring that your food remains fresh without taking up too much space or energy.