PD968DP
GE Profile™ 30" Drop-In Electric Range
Dimensions and Installation Information (in inches)
Accessory
Backguard
24 | A/B* |
KW Rating
240V | 11.6 |
|
|
208V | 8.7 |
|
|
Breaker Size | |
|
|
240V | 40 Amps |
|
|
208V | 40 Amps |
|
|
Note: Cabinets installed adjacent to
Note: To reduce possibility of scorching the side walls above the countertop when no load is present on burners, it is recommended that a minimum of 6" spacing from adjacent side wall be allowed for possible extended,
IMPORTANT: 30"
of Countertop
27
Clearance
From Front
Surface of
Countertop
*JXS37 is | |
(excluding handle) |
|
Optional Kits For
Accessory Backguards (Attaches to the back of range
as a backguard when unit is installed in 30"
JXS32SS (Stainless) - 4" High JXS32BB (Black) - 4" High JXS37CC (Bisque) -
Rear Filler Strip
WB07T10680 - Black Filler Strip Assembly
Installation information: Before installing, consult installation instructions packed with product for current dimensional data.
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
If necessary, build upsides to
**Total depth from wall to |
front of closed oven door |
including handle is |
30" Min.
6" Min. from walls
| 30" Min. |
|
Acceptable Electrical Outlet |
| |
Area Also In Adjacent | 15" Min. | |
| Cabinet Or Under Floor | |
| Conduit is 40" long | |
| 25 |
|
36 |
|
|
|
| |
30 |
|
|
All GE ranges are equipped with | Listed by | Acces |
| ||
an |
| |
of this device is an important, | Underwriters |
|
required step in the installation | Laboratories |
|
of the range. |
|
|
Specification Created 5/09 | 220805 |