Sherwood RX-4503 Manual presetting, Repeat the above steps1 to 3 to memorize other stations

RX-4503(A) 2008.8.12 3:43 PM 페이지 18

ENGLISH

Manual presetting

•You can store up to 30 preferred stations in the memory.

1.Tune in the desired station with auto or manual tuning.

2.Press the MEMORY button.

• "MEM" is flickering for several seconds.

MEM

3. Select the desired preset number (1~30) and press the MEMORY button.

• When using the NUMERIC buttons on the remote control.

Examples) For “3” :

For “15” :

For “30” :

• The station has now been stored in the memory.

• When using the NUMERIC buttons, the station is stored automatically without pressing the MEMORY button.

• A stored frequency is erased from the memory by storing another frequency in its place.

• If “MEM” goes off, start again from the above step 2.

4. Repeat the above steps1 to 3 to memorize other stations.

■MEMORY BACKUP FUNCTION

The following items, set before the receiver is turned off, are memorized.

•INPUT SELECTOR settings

•Surround mode settings

•Preset stations,etc.

Tuning to preset stations

• After selecting the tuner as an input source, select the desired preset number.

• When using the NUMERIC buttons on the remote control.

Examples) For “3” :

For “15” :

For “30” :

18