Prepare to Install the Range

Installation Instructions

FOR YOUR SAFETY:

All rough-in and spacing dimensions must be met for safe use of your range. On ranges with storage drawers electricity can be disconnected at the outlet without moving the range if the outlet is in the preferred location (remove storage drawer).

To reduce the risk of burns or fire when reaching over hot surface elements, cabinet storage space above the cooktop should be avoided. If cabinet storage space is to be provided above the cooktop, the risk can be reduced by installing a range hood that sticks out at least 5” beyond the front of the cabinets. Cabinets installed above a cooktop must be no deeper than 13”.

Be sure your appliance is properly installed and grounded by a qualified technician.

Make sure the cabinets and wall coverings around the range can withstand the temperatures (up to 200°F) generated by the range.

MATERIALS YOU MAY NEED

Tin Snips

Lag Bolts

Anchor Sleeves

(For Anti-Tip Bracket Mounted

on Concrete Floors Only)

(UL Approved 40 AMP)
4-Wire Cord OR	3-Wire Cord	Squeeze Connector
		(For Conduit
4‘ Long	4‘ Long
		Installations Only)

PARTS INCLUDED

Anti-Tip Bracket Kit

TOOLS YOU WILL NEED

Drill with 1/8” Bit

Safety Glasses

Adjustable Wrench Tape Measure

1 REMOVE SHIPPING MATERIALS

Remove packaging materials. Failure to remove packaging materials could result in damage to the appliance.

Pliers	Pencil
1/4” Nut Driver	Level
Phillips Screwdriver	Flat-blade
	Screwdriver