GE JBP35SM installation instructions GE 30 Free-Standing QuickClean Electric Range, Listed by

Page 1

JBP35SM

GE® 30" Free-Standing QuickCleanElectric Range

Dimensions and Installation Information (in inches)

KW Rating

240V

12.1

 

 

208V

9.1

 

 

Breaker Size

40 Amps

Note: Check local codes for required breaker size.

Effective January 1, 1996, the National Electrical Code requires that new construction (not existing) utilize a 4-conductor connection to an electric range.

Receptacle Locations: Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall.

Note: 30" ranges conform to U.L. requirements for 0" spacing from adjacent walls below countertops. To reduce possibility of scorching walls, engineering recommends a minimum of 1-1/2" spacing to allow for possible extended, high-heat, no-load heating element operation.

Installation information: Before installing, consult installation instructions packed with product for current dimensional data.

2-1/2

Acceptable electrical

outlet area

29-7/8

46-7/8

25-3/8

47-5/8

30

25

2-1/2

7-1/2

Dimension from wall to closed oven door hand

For answers to your Monogram,® GE Profileor GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Dimension from wall to front of closed door handle is 27-3/4".

All GE ranges are equipped with

Listed by

an Anti-Tip device. The installation

of this device is an important,

Underwriters

required step in the installation

Laboratories

of the range.

 

Specification Created 4/07

322101

Image 1
Contents JBP35SM GE 30 Free-Standing QuickClean Electric RangeAcceptable electrical Outlet area Listed byFeatures and Benefits