Sima Products XL-12, XL-8 user manual Troubleshooting Guide, Problem Solution

Page 20

Troubleshooting Guide

Problem

Solution

Wrinkles & Creases in the screen

1.

Remove the screen prior to deflating and roll it back onto the

Note: Some wrinkles are normal and will not

tube for storage.

 

 

affect the viewing image.

2.

Setup the screen and frame in a warm environment (Sunlight)

 

to remove the wrinkles from the screen.

The frame is deflating over time

1.

Be sure to remove the air pump hose after inflating. Air can

 

leak back through the pump if not removed.

 

2.

Check the inner rubber air valves are seated properly prior to

Note: If the frame is left inflated overnight

closing outer threaded cap.

 

 

during a moderate temperature change the

3.

Listen for air holes in the frame around the seams. You may

frame will show a loss of air pressure. Be sure

use mild soap and water to locate the leak.

to deflate frame and store after usage.

4.Be sure to remove all soap residues prior to using a patch kit.

 

No power to the speakers

1.

Check that the AC power cables are plugged into a working

 

outlet.

 

2.

Check the AC power cable connection on the back of the

 

speakers. Be sure it is inserted completely.

 

3.The off/on switch should illuminate when on if power is

 

connected correctly. If power is still not present check to see if

 

the fuse needs replaced. When removing the fuse block you will

 

find a spare fuse.

No audio sound from the speakers

1.

Check that all the audio cables are connected correctly.

 

2.

Be sure the volume levels on the speaker, volume control box

 

and DVD player are set correctly

Distorted Sound from speakers.

1.

If you are playing at a loud volume level, reduce the volume

 

 

 

Audio humming noise in the speaker

1.

Keep audio cables away from the AC wires.

 

2.

Keep all your components plugged into the same GFI outlet.

 

This will eliminate ground looping.

 

3.

Reduce the level control on the speaker.

 

 

 

Video is not bright enough on the screen

1.

Use a projector with enough lumens to better view your video

 

for certain outdoor conditions.

 

2.

Use the supplied black light guard to cut down on rays of

 

unwanted light.

Part of the picture is missing viewing in the rear

1.

Place the projector on a stand so its height is centered in the

projection position.

screen.

 

 

 

Page 21

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Page Sima Products Corporation Pennsylvania Ave Bldg #5 Table of Contents Introduction General Information and WarningsSelecting a Setup Site List of MaterialsUnpacking the Screen Inflating the ScreenPage Page Screen Installation with Velcro Strips Page Lacing Up the Screen Page Light Guard Installation with Velcro Strips Projector Distance Securing the Screen to the Ground Hooking up the Speakers to the Volume Control Box Speaker Specifications and Drawing XL-SP-8 XL-SP-8Screen Deflation & Repacking Repair Kit Finding a leakTroubleshooting Guide Problem SolutionSpecifications sheet Sima’s Outdoor Inflatable Home Theater Kits Limited Warranty Attn Home Theater Department

XL-8, XL-12 specifications

Sima Products has established itself as a leader in the design and manufacturing of high-performance cleaning solutions, with the XL-12 and XL-8 standing out as exemplary offerings in their product line. These robust machines are engineered to meet the demanding needs of both residential and commercial cleaning applications, showcasing a blend of innovative technology and user-friendly features.

The Sima XL-12 is notable for its powerful suction capabilities, which allow users to tackle even the toughest messes with ease. This model is equipped with a high-efficiency motor that provides exceptional airflow, ensuring quick and thorough cleaning. The XL-12 also features an adjustable suction power, giving users the flexibility to customize the cleaning experience based on the surface being treated, from delicate fabrics to more durable flooring.

On the other hand, the Sima XL-8 is designed for convenience and maneuverability. It is lightweight yet sturdy, making it easy to transport and use in a variety of environments. The XL-8 is particularly praised for its user-friendly controls, allowing operators to switch between different cleaning modes effortlessly. This model is ideal for smaller spaces where agility is key, without compromising on performance.

Both the XL-12 and XL-8 are equipped with advanced filtration systems designed to trap dust and allergens, promoting cleaner indoor air quality. The high-quality HEPA filters not only capture fine particles but also are easily accessible for maintenance, ensuring that the machines operate at peak efficiency over time.

Durability is another hallmark of Sima's products, with the XL-12 and XL-8 featuring robust construction materials that can withstand extensive use in demanding cleaning environments. The ergonomic design contributes to ease of use, minimizing user fatigue during prolonged cleaning sessions.

In terms of versatility, both models come with a range of attachments that enhance their functionality, enabling users to clean carpets, upholstery, and hard surfaces efficiently. This adaptability makes them ideal for various settings – from homes and offices to retail spaces and healthcare facilities.

Overall, the Sima Products XL-12 and XL-8 embody innovation in cleaning technology, offering powerful performance, user-centric design, and superior filtration systems that elevate the standard of cleanliness in any environment. Whether it’s the robust features of the XL-12 or the convenience of the XL-8, both machines are sure to meet the diverse needs of users seeking efficient and effective cleaning solutions.
Top Page Image Contents