Instructions Safety Instructions, Cleaning Operating

Instructions Safety Instructions

Care and cleaning of the range.

Oven Heating Elements

Do not clean the bake element or the broil element. Any soil will burn off when the elements are heated.

To clean the oven floor, gently lift the bake element. Clean with warm soapy water.

Cleaning Operating

After broiling, remove the broiler pan from the oven.

Broiler Pan & Grid

After broiling, remove the broiler pan from the oven. Remove the grid from the pan. Carefully pour out the grease from the pan into a proper container.

Wash and rinse the broiler pan and grid in hot water with a soap-filled or plastic scouring pad.

Do not store a soiled broiler pan and grid anywhere in the range.

If food has burned on, sprinkle the grid with detergent while hot and cover with wet paper towels or a dishcloth. Soaking the pan will remove burned-on foods.

Both the broiler pan and grid may be cleaned with a commercial oven cleaner.

Both the broiler pan and grid can also be cleaned in a dishwasher.

Consumer Support Troubleshooting Tips Care and

Porcelain Oven Interior

With proper care, the porcelain enamel finish on the inside of the oven—top, bottom, sides, back and inside of the door—will stay new-looking for years.

Let the range cool before cleaning. We recommend that you wear rubber gloves when cleaning the range.

Soap and water will normally do the job. Heavy spattering or spillovers may require cleaning with a mild abrasive cleaner. Soapy, wet metal pads may also be used.

Do not allow food spills with a high sugar or acid content (such as tomatoes, sauerkraut, fruit juices or pie filling) to remain on the surface. They may cause a dull spot even after cleaning.

Household ammonia may make the cleaning job easier. Place 1/2 cup in a shallow glass or pottery container in a cold oven overnight. The ammonia fumes will help loosen the burned-on grease and food.

If necessary, you may use an oven cleaner. Follow the package directions.

■Do not spray oven cleaner on the electrical controls and switches because it could cause a short circuit and result in sparking or fire.

■Do not allow a film from the cleaner to build up on the temperature sensor—it could cause the oven to heat improperly. (The sensor is located at the top of the oven.) Carefully wipe the sensor clean after each oven cleaning, being careful not to move the sensor as a change in its position could affect how the oven bakes.

■Do not spray any oven cleaner on the oven door, handles or any exterior surface of the oven, cabinets or painted surfaces. The cleaner can damage these surfaces.

JMS08 specifications

The GE JMS08 is an advanced gas turbine engine offering from General Electric, renowned for its cutting-edge technology and robust performance. This engine is part of GE's renowned jet engine family, specifically designed for regional and business aviation applications. The JMS08 integrates a diverse range of features and technological advancements that make it a leading choice in its class.

One of the most notable features of the JMS08 is its high thrust-to-weight ratio, which enhances aircraft performance, particularly during takeoff and climb phases. This efficiency translates into lower operational costs and improved fuel consumption, making the JMS08 a cost-effective solution for operators.

The JMS08 utilizes advanced materials, including lightweight composite components and high-strength alloys, which contribute to its reduced weight and improved thermal efficiency. The engine’s advanced cooling techniques are also noteworthy, allowing for optimal performance in a wide range of environmental conditions. This capability ensures that the JMS08 maintains high efficiency and reliability even in extreme temperatures.

Another significant characteristic of the JMS08 is its state-of-the-art digital control system. This system allows for precise monitoring and management of the engine's performance, optimizing its operation under varying flight conditions and improving overall safety. The integration of automation into the engine’s controls enables real-time data analysis, driving enhancements in performance and predictability.

The JMS08 is designed with modular construction in mind, facilitating easier maintenance and repair processes. This modularity not only reduces downtime for aircraft but also simplifies the logistics of parts replacement, resulting in enhanced operational efficiency for airlines and operators.

Noise reduction technologies have also been incorporated into the JMS08. GE has invested heavily in designing quieter engines, and the JMS08 employs advanced acoustic treatments and configurations that minimize noise pollution, addressing regulatory requirements and enhancing passenger comfort.

Overall, the GE JMS08 stands out as a highly efficient, reliable, and technologically advanced gas turbine engine. Its combination of power, fuel efficiency, and innovative features positions it as a leading option for regional jets and business aviation, confirming GE’s commitment to pushing the boundaries of aviation technology while catering to the demands of modern aviation. Operators can expect a blend of performance and economy, making the JMS08 a valuable asset in today’s competitive aviation landscape.