Dimplex Corner Standing Stove manual Resetting the Temperature Cutoff Switch, Remote Operation

Page 9

RESETTING THE TEMPERATURE CUTOFF SWITCH

Should the heater overheat, an automatic cut out will turn the heater off and it will not come back on without being reset. It can be reset by switching the MAIN ON/OFF SWITCH to OFF and waiting 5 minutes before switching the unit back on.

CAUTION

If you need to continuously reset the heater, unplug the unit and call Dimplex technical support at 1-888-DIMPLEX (1-888-346-7539) Extension 4.

NOTE

The heater may emit a slight, harmless odor when first used. This odor is a normal condition caused by initial heating of internal heater parts and will not occur again.

REMOTE OPERATION

The Fireplace is supplied with an integrated on/off remote control

Note: Ensure that the fireplace 3 position switch is set to the remote

Control setting. (Up position)

To operate, push the ON button to turn fireplace on, push the OFF button to turn the fireplace off.

BATTERY REPLACEMENT

To repalce the battery, slide battery cover open on the hand held transmitter. Correctly install one 12 volt (A23) battery in the battery holder.

Close the battery cover.

ON BUTTON

OFF BUTTON

BATTERY

BATTER COVER

FIGURE 16

6

Image 9
Contents Practical USER’S Guide For the Corner Standing Stove Contents Quick Reference Guide for the Corner Standing Stove Page Model and Serial Number Important InstructionsSecuring Instructions Safety Wall StrapSupport Hole Heater on Switch Main ON/OFF SwitchEWMSC-W EWMSC-ESPResetting the Temperature Cutoff Switch Battery ReplacementRemote Operation Maintenance Surface Cleaning Glass CleaningTWO Year Limited Warranty What Dimplex will do in the event of a defect How State and Provincial law apply Dimplex