TOOL REQUIREMENTS
Phillips screw driver
HELPFUL HINTS
It is a good idea to replace all light bulbs at one time if they are close to the end of their rated life. Group replacement will reduce the number of times you need to open the unit to replace light bulbs.
UPPER LIGHT BULB REQUIREMENTS
Quantity of 1 clear chandelier or candelabra bulbs with an
UPPER BULB REPLACEMENT
1.Open door by pulling the handle.
2.Locate the upper bulb bracket.
3.Bend light retainer bracket down.
4.Locate and remove the light bulb.
5.Insert new bulb.
6.Bend light retainer bracket back into its original position.
7.Close the door.
LOWER LIGHT BULB REQUIREMENTS
Quantity of 2 clear chandelier or candelabra bulbs with an
LOWER BULB REPLACEMENT
1.Open door by pulling the handle.
2.Remove the screw from the logset located in the center of the emberbed and remove the logset from the unit.
3.Locate and examine the bulbs to determine which bulb(s) required replacement.
4.Locate and remove the light bulb(s).
5.Insert new bulb(s).
6.Install the logset into the unit, pushing firmly against the glass. Replace the logset retaining screw into the ember bed.
7.Close the door.
5